Markilux 790 Installation Notes

Side awning
markilux- 790
Installation notes
These installation instructions are intended for
trained fitters and electricians. They specify how this
awning is to be installed and first operated.
Read them carefully before installing the awning as well
as our general safety instructions.
Check the goods supplied for completeness and
shipping damage before beginning installation.
The sequence of installation and adjustment specified
herein is always to be adhered to.
The side awning is shipped in the following parts.
• Completely assembled cassette in protective foil
• 2 holders for cassette wall mounting
• Depending on order: 1 retaining post with base plate,
1 retaining post with ground sleeve or 1 wall holder
1. Fastening means
Overview of dimensions
Tension sectioning fastening means
2. Recommendations and instructions on
fastening holders in place
This side awning is supplied without assembly screws,
as differing wall materials etc. require differing types of
fastening.
Fastening means must be such as safely distribute the
forces exerted to the object/s used to hold the awning.
Mathematical proof of the tensile forces exerted on the
fastening screws on the basis of 70 N per m² pf awning
fabric is required. .
The fastening means used depends on the material it is
secured to (steel beams, wood, etc.).
Maximum screw sizes for wall holder fastening:
Cheese-head screws
Cheese-head sheet metal screws
Tensioning plate screws
Wood screws
Caution
Maximum screw head height is 5.5 mm.
M6x...
6.3x...
6.0x
6.0x
1