Configuration Using The Pc - Woodward easYgen-300 Operation Manual

Genset control

Hide thumbs Also See for easYgen-300:

Operation manual (114 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

Table of Contents

Manual 37218D

CAUTION

For the configuration of the unit via the PC please use the LeoPC1 software with the following software

version:

NOTE

Please note that configuration using the direct configuration cable DPC (product number 5417-557) is

possible starting with revision B of the DPC (first delivered July 2003). If you have an older model

please contact our sales department.

For configuration of the unit via PC program please proceed as follows:

• Install the LeoPC1 program on your notebook/PC according to the provided user manual 37146. Consider the

options that are given during the installation.

• Prior to the completion of the installation you will be prompted to select the language with which you want to

start the PC program. The language of LeoPC1 may be changed at any time. The selection of the language re-

fers only to language with which the menus and subprograms that LeoPC1 program works with. This setting

will not change the configured language of the control unit.

• After the installation of LeoPC1 has been completed it is necessary to reboot your notebook/PC.

• Establish a connection between your notebook/PC and the control unit via the DPC cable. Insert the RJ45

plug into the RJ45 port on the control unit (see DPC - Direct Configuration Cable on page 32 for details) and

the serial cable to the COM1 port of your notebook/PC.

• You can now start the PC program as follows:

- by "Start/Program/Woodward/LeoPC1" (version 3.1 or higher) and opening the respective cfg file, or

- by a double click on the respective file ending ".cfg" in the subdirectory "/LeoPC1".

The cfg files differ in their language used. Use the file on the enclosed floppy disk with the language you

want, i.e. US for US English or DE for German.

• After the LeoPC1 program has started, establish communication by pressing the F2 button or selecting Com-

munication -> Connect from the menu. This will establish a data link between the control unit and the note-

book/PC.

• Start the configuration routine pressing the F3 button or selecting Devices -> Parameterize from the menu and

adjust the parameter of the unit to your application using this manual.

NOTE

You find detailed information about LeoPC1 and the utilization of the software in the user manual

37146 belonging to it.

NOTE

The connection cables delivered with the DPC must be used to connect it to ensure a proper function

of the easYgen. An extension or utilization of different cable types for the connection between easYgen

and DPC may result in a malfunction of the easYgen. This may further result in damage to components

of the system. If an extension of the data connection line is required, only the serial cable between DPC

and notebook/PC may be extended.

NOTE

Unplug the DPC after configuration to ensure a safe operation! If the DPC remains plugged into the ea-

sYgen-300 unit, a safe operation of the unit can not be guaranteed.