Fuel Cap/Spark Plug - Ryobi CS30, SS30, BC30 Operator's Manual
30cc string trimmers and brushcutters
Hide thumbs
Also See for CS30, SS30, BC30:
- Operator's manual (15 pages) ,
- Operator's manual (26 pages) ,
- Operator's manual (28 pages)
Table of Contents
Advertisement
FUEL CAP
WARNING:
A leaking fuel cap is a fire hazard and must be replaced
immediately.
The fuel cap contains a non-serviceable filter and a check
valve. A clogged fuel filter will cause poor engine perfor-
mance. If performance improves when the fuel cap is loos-
ened, check valve may be faulty or filter clogged. Replace
fuel cap if required.
SPARK PLUG
This engine uses a Champion RCJ-6Y or NGK BPMR7A
spark plug with 0,63 mm (.025 in.) electrode gap. Use an
exact replacement and replace annually.
STORAGE (1 MONTH OR LONGER)
1. Drain all fuel from tank into a container approved for
gasoline. Run engine until it stops.
2. Clean all foreign material from the trimmer. Store it in a
well-ventilated place that is inaccessible to children. Keep
away from corrosive agents such as garden chemicals
and de-icing salts.
3. Abide by all ISO and local regulations for the safe storage
and handling of gasoline. Excess fuel should be used up
in other 2-cycle engine powered equipment.
MAINTENANCE
Page 22
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CS30, SS30, BC30 and is the answer not in the manual?
Questions and answers
⛽️ ⛽️ mixture for ss30 weed eater
The Ryobi SS30 weed eater uses a fuel mixture of unleaded gasoline and 2-cycle engine lubricant. The recommended mix ratio is 2.6 ounces of high-quality 2-cycle engine lubricant per gallon of gasoline. Do not use automotive or 2-cycle outboard lubricant.
This answer is automatically generated
My fuel lines got brittle and fell off. To replace them, I need the routing diagram for the fuel lines.