Bulb Replacement - Ryobi FL1800 Operator's Manual

SWITCH
See Figure 2.
To turn your flashlight on and off, depress switch trigger.
°
180 ROTATING HEAD
See Figure 2.
Your flashlight has the feature of rotating the head 180°
back and forth.

BULB REPLACEMENT

See Figure 3.
When purchasing replacement bulb, request recommended
part number 780175002.
TO REPLACE BULB:
■ Allow bulb to cool.
■ Remove battery pack from flashlight.
■ Remove lens cover by turning cover in counterclockwise
direction, then remove cover.
■ Remove old bulb from spring.
■ Position new bulb in spring.
■ Replace lens cover.
■ Replace battery pack.
Note: For your convenience, your flashlight has a spare
bulb storage area. It is located behind the lens cover.
See Figure 3.
WARNING:
Lens and bulb become hot during use:
•
During or immediately after use, don't lay flashlight
flat on lens surface or place lens area in contact with
a plastic or fabric covered surface.
•
Handle flashlight with care around any flammable
surface.
•
Let flashlight cool for several minutes after use before
changing bulb.
•
Do not use or permit use of flashlight in bed or sleeping
bags. This flashlight lens can melt fabric and a burn
injury could result.
OPERATION
180
BULB STORAGE
Page 7
°
ROTATING HEAD
AREA
BULB
LENS COVER
SWITCH
TRIGGER
Fig. 2
Fig. 3