TST -507-D-M Manual

Wireless tire pressure and temperature monitoring system monochrome display

Hide thumbs

Table Of Contents

Wireless Tire Pressure and Temperature

Monitoring System Monochrome Display Manual

Wide Screen Monochrome Display

Model #: TST-507-D-M

Thank you for purchasing the TST Tire Pressure Monitoring

System. With minimal care, your new TPMS will

provide reliable service for many years. Please read and

understand the information contained within this manual.

Keep this manual for future reference.

Telephone: 770.889.9102

Website:

www.tsttruck.com

Document #: TST-Doc-507 WSD-M Manual-(C)

Table of Contents

Need help?

Do you have a question about the TST-507-D-M and is the answer not in the manual?

Questions and answers

Summary of Contents for TST TST-507-D-M

Page 1 Monitoring System Monochrome Display Manual Wide Screen Monochrome Display Model #: TST-507-D-M Thank you for purchasing the TST Tire Pressure Monitoring System. With minimal care, your new TPMS will provide reliable service for many years. Please read and understand the information contained within this manual.
Page 2 TST-Doc-507 WSD-M Manual-(C) INDEX Page 1 - Display Features Page 2 - Display Components and Controls Pages 3 - 6 - Programming Sensor Codes Into the Display - Automatic Code Learning (Option #1) - Pressure Coding (Option #2) - Manual Coding (Option #3)
Page 3: Display Features
TST-Doc-507 WSD-M Manual-(C) DISPLAY FEATURES 1) Large, wide screen LCD display of pressure and temperature. 2) Options for Color or Monochrome screen. 3) Suction cup and cradle mount included. 4) Integrated lithium battery that is rechargeable. 5) Wake-up activation of monitor when in motion.
Page 4 TST-Doc-507 WSD-M Manual-(C) DISPLAY COMPONENTS IN KIT Power Adapter Suction Cup Mount Monochrome Display Cradle Mount DISPLAY CONTROLS Display Holder BACK Pressure Unit: BAR or PSI, user-selectable temperature unit: C° or F°, user-selectable.
Page 5 TST-Doc-507 WSD-M Manual-(C) PROGRAMMING SENSOR CODES INTO THE DISPLAY Note: Your sensors will begin reading as soon as they are coded into the display. Once you go back to the main screen by pushing the “BACK” button twice, you may hear an alarm and see a pressure reading of “0”.
Page 6: Automatic Code Learning (Option #1
TST-Doc-507 WSD-M Manual-(C) AUTOMATIC CODE LEARNING (option #1) Note: Code all the sensors to the display BEFORE screwing them onto the tire valve stem unless otherwise noted. 1. Push and hold the “SET” button until it beeps. You are now in the programming mode. The “HI PRESSURE SET”...
Page 7: Pressure Coding (Option #2
TST-Doc-507 WSD-M Manual-(C) Note: To delete a single sensor code: Press the “SET” button until it beeps (approx. 3 seconds). Push the (+) button and scroll through the parameters until “LEARN ID” appears. Press and release the “SET” button. Use the (+) or (-) buttons to scroll to the tire you wish to remove.
Page 8: Manual Coding (Option #3
TST-Doc-507 WSD-M Manual-(C) different tire, press the (+) button to move to the correct tire. Push the “SET” button again and “FFF FFF” will flash. 4. Tighten the sensor down on the corresponding tire valve stem. The ID code will display and flash.
Page 9: Display Installation
TST-Doc-507 WSD-M Manual-(C) 4. To stop the coding for any position, Press “BACK” once. “FFF FFF” will reappear. No settings will be saved. 5. Press “BACK” twice to return to the main screen. DISPLAY INSTALLATION 1. The provided suction cup mount can be used on the windshield, side window or directly on a smooth dash.
Page 10 TST-Doc-507 WSD-M Manual-(C) NOTE: The side power switch will not turn off the monitor when constant power is applied to the unit. PARAMETER SETTINGS (Setting the sensor alarms) NOTE: The factory default settings are: Pressure Unit: PSI Temperature units: °C High Pressure: 175 lbs.
Page 11 TST-Doc-507 WSD-M Manual-(C) the screen, blinking. Press the “SET” button again and then use the (+) button to select °F or °C. Press “SET” again to select it. Press “BACK” to go back to the Main Screen. HIGH TEMPERATURE ALARM SETTINGS To set the High Temperature Alarm, press the “SET”...
Page 12: Low Pressure Alarm Settings
TST-Doc-507 WSD-M Manual-(C) normal tire pressure for that axle. Press the “GO” button to move to the next axle. When done setting each axle that you have sensors on, press the “SET” button to leave that parameter and TST-Doc-507 WSD-M Manu go back to the menu.
Page 13 TST-Doc-507 WSD-M Manual-(C) low-pressure alarms first and then, when done, set the high- pressure alarms. The high pressure cannot go below the default low pressure of 100 psi until the low pressure is reduced. RESTORE PARAMETERS TO FACTORY DEFAULT SETTINGS First, turn off the display.
Page 14 TST-Doc-507 WSD-M Manual-(C) be silenced for a short while by pushing any of the buttons on the front of the display. The red warning light will continue to flash until the pressure or temperature issue is resolved and brought back into your preset levels.
Page 15: Other Functions
TST-Doc-507 WSD-M Manual-(C) OTHER FUNCTIONS Normal Display Scrolling The tire icons on the display will automatically scroll/cycle through, one by one. Each tire will be displayed for approximately 5-6 seconds. You can manually cycle through the displayed tires by pushing the (+) or (-) buttons on the display. The display will show the tire you choose for approximately 10 seconds before continuing to cycle.
Page 16 TST-Doc-507 WSD-M Manual-(C) Charging the Display The display is powered by a non-replaceable, lithium-ion battery. A battery level indicator is located on the left side of the display. When the indicator shows one bar, it is recommended you charge the display as soon as possible to avoid disruption when in use. It will take approximately four (4) hours to fully charge.
Page 17 TST-Doc-507 WSD-M Manual-(C) • Again, press the (+) or (-) buttons to select the next digit. Continue for the final (3rd) digit. • When done, push the “SET” button to save. • Push the “BACK” button twice to get back to the Main Screen.
Page 18: Troubleshooting Tips
TST-Doc-507 WSD-M Manual-(C) TROUBLESHOOTING TIPS • It may take up to 15 minutes for the sensor data to appear on the display the first time you set up the system. Leave the display on until all sensor data appears. After the...
Page 19 2. Be aware that an indoor/outdoor thermometer with an external temperature sensor may interfere with the TST TPMS. Temporarily remove all the batteries in the display AND exterior sensor and see if the problem is corrected. A thermometer with a higher frequency (915 Mhz) may be required.
Page 20 TST-Doc-507 WSD-M Manual-(C) 2. A low sensor battery. 3. An overheating tire, increasing the temperature. 4. A high or Low-pressure reading (be sure your parameters are set correctly). In every instance, the tire Pressure and Temperature numbers will also flash when the tire with the problem blinks.
Page 21: Display Specifications
TST-Doc-507 WSD-M Manual-(C) • How do I remove an unwanted tire icon from the monitor? 1. To delete a single sensor code: 2. Press the “SET” button until it beeps (approx. 3 seconds). Push the (+) button and scroll through the parameters until “LEARN ID”...
Page 22 The system cannot prevent acci- dents nor will TST be responsible for damage or injury due to (a) improper use, (b) failure to follow the product instructions or to...
Page 23 TST-Doc-507 WSD-M Manual-(C) NOTES:...