Propel Trampolines PTSA15-108 User Manual

Propel Trampolines PTSA15-108 User Manual

Up to 15 feet
Hide thumbs Also See for PTSA15-108:

Advertisement

Trampoline and
Enclosure User Manual
For all round Propel Trampoline models
Assembly, Installation, Care, Maintenance,
and User Instructions
WARNING
READ THESE MATERIALS PRIOR TO ASSEMBLING AND
USING THIS TRAMPOLINE AND ENCLOSURE.
Failure to assemble and use this trampoline and enclosure net combination as specified in this manual
will automatically void the warranty.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTSA15-108 and is the answer not in the manual?

Questions and answers

Summary of Contents for Propel Trampolines PTSA15-108

  • Page 1 Trampoline and Enclosure User Manual For all round Propel Trampoline models Assembly, Installation, Care, Maintenance, and User Instructions WARNING READ THESE MATERIALS PRIOR TO ASSEMBLING AND USING THIS TRAMPOLINE AND ENCLOSURE. Failure to assemble and use this trampoline and enclosure net combination as specified in this manual will automatically void the warranty.
  • Page 2 Do Not return this product to the store. Instead, please visit our website at www.PropelTrampolines.com where you will find our current contact information. Our friendly customer service staff can help you with any problems or questions that may arise during the assembly, installation, use, maintenance, or obtainment of replacement parts for your Trampoline.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS BEFORE YOU BEGIN - 4 INSTRUCTIONAL MATERIAL AND RULES FOR USE - 5 OVERVIEW OF TRAMPOLINE AND ENCLOSURE COMBINATION USE - 6 INSTRUCTIONAL PROGRAM AND MODEL LESSONS - 7 FUNDAMENTAL TRAMPOLINE SKILLS - 8 ASSEMBLY INSTRUCTIONS - 10 FRAME ASSEMBLY - 11 ENCLOSURE POST ASSEMBLY - 14 MAT AND ENCLOSURE ASSEMBLY - 15...
  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for purchasing a Propel Trampoline and enclosure net combination. This trampoline and enclosure net combination comes equipped with warnings and instructions for its proper assembly, care, maintenance, and use. This information must be read by all supervisors and users before any person is allowed to use it. Follow all warning pictures shown below or otherwise included elsewhere in this manual.
  • Page 5: Instructional Material And Rules For Use

    INSTRUCTIONAL MATERIAL AND RULES FOR USE Warning 1. DO NOT attempt or allow somersaults. Landing onto the trampoline when mounting. Do not use the on the head or neck can cause serious injury, trampoline as a springboard to other objects. paralysis, or death, even when landing in the middle 16.
  • Page 6: Overview Of Trampoline And Enclosure Combination Use

    OVERVIEW OF TRAMPOLINE AND ENCLOSURE COMBINATION USE The first practice sessions of your new trampoline and enclosure net combination should focus on learning fundamental body positions and practicing the eight basic jumps (see pages 8-9). During this learning period jumpers should practice these basic techniques and perfect them. Braking, or checking the jump should be taught first and stressed as a safety measure.
  • Page 7: Instructional Program And Model Lessons

    INSTRUCTIONAL PROGRAM AND MODEL LESSONS The following lessons are examples of an instructional program. They should follow a complete discussion and demonstration of body mechanics between the supervisor and the student(s). See pages 8 and 9 for descriptions of basic jumping skills. Lesson 1 1.
  • Page 8: Fundamental Trampoline Skills

    FUNDAMENTAL TRAMPOLINE SKILLS Knee Drop Fundamental Jump 1. Start bouncing from a standing position, 1. Start from a standing position with your head keeping your eyes on the frame pad. erect and your eyes on the frame pad. 2. Land on your knees, keeping your back straight 2.
  • Page 9 to the mat. 2. Place your hands on the mat beside your hips. Front Drop 3. Push with your hands to return to an erect position. 1. Start from a low bounce and land on the mat in a prone position. 2.
  • Page 10: Assembly Instructions

    ASSEMBLY INSTRUCTIONS WARNINGS  Adequate overhead clearance is essential. A minimum of 24 feet from ground level is recommended. Provide clearance for wires, tree limbs, and other possible hazards.  Lateral clearance is essential. Place the trampoline and trampoline enclosure net away from walls, structures, fences, and other play areas.
  • Page 11: Frame Assembly

    Frame Assembly Read and understand all assembly instructions before beginning the assembly process. Your trampoline frame is assembled using two types of t-brackets; type A (regular t-brackets) and type B (enclosure t-brackets). The enclosure t-bracket includes a special slot to insert an enclosure pole.
  • Page 12 safety sticker attached. The peak of the brace (D) should point toward the ground. Insert one of the leg tubes (C) into one of the t-brackets (which were previously assembled in step one). Insert the other leg into the other t-bracket. Press down on both legs at the same time to ensure that they are fully inserted into the sockets.
  • Page 13: Enclosure Post Assembly

    positions shown in the figure below. Insert the crimped end of the frame tube of one section into the t-bracket (A) of another. Repeat this step; inserting each leg section into the next to complete the trampoline frame circle. Enclosure Pole Assembly Page 13...
  • Page 14 Read and understand all assembly instructions before beginning the assembly process. Your trampoline’s enclosure poles come in two sections; an upper (curved) and a lower (straight) section. Step 1 – Connect one upper pole section and one lower pole section together, making sure to match the screw holes in the two sections.
  • Page 15 Assembly Read and understand all assembly instructions before beginning the assembly process. This trampoline should not be installed without the included enclosure safety net. Step 1 – Unfold and lay the jumping mat (jumping surface) on the ground inside the trampoline frame circle.
  • Page 16 Step 4 – Locate the Bungee Straps sewn to the top edge of the Enclosure and connect all Bungee Loops with Bolts to your Enclosure Net by inserting the Bolt up through the Net Loop and bringing it down through the resulting Loop in the Bungee Cord, as shown in the illustrations below.
  • Page 17 Step 7 – Your enclosure net should now be hanging loosely from the enclosure poles with the zippered opening centered between two enclosure poles. Straighten out any areas where the enclosure netting appears to be bunched up. Step 8 – Now starting on the left side of the t-bracket feed the short end of a new spring through the enclosure net near the bottom edge and attach it to the v-ring (as shown in figure 1 below).
  • Page 18 Now remove the spring on the right side of each t-bracket and re-attach it through the enclosure netting to the corresponding v-ring on the jumping mat. Note, that from this point on when attaching springs they must be attached to the jumping mat through the enclosure net.
  • Page 19: Safety Pad Assembly

    Safety Pad Assembly Read and understand all assembly instructions before beginning the assembly process. Step 1 – Lift the enclosure poles out of the t-bracket slots and lean them forward so they are resting on the jumping mat (as shown in the picture to the left).
  • Page 20 Step 4 –Locate the spring loops on the underside of the pad. Find the spring nearest to the spring loop and unhook it from the frame. Insert the spring through the spring loop, and reattach it to the frame. Repeat this step until all spring loops have been attached.
  • Page 21: Warning Label Placement

    WARNING LABEL PLACEMENTS Note: These labels are not shown at their actual size. These labels have been attached to the Trampoline Enclosure in the indicated locations. Please verify that none of these labels missing illegible. please contact us and request a free replacement.
  • Page 22 Using an anchor kit is not an insurance policy and will not add additional warranty benefits to your trampoline. Propel Trampolines and its retailers/affiliates will not be held responsible for damages to persons or property as a result of the failure of this product.
  • Page 23: Moving The Trampoline

    MOVING THE TRAMPOLINE AND ENCLOSURE NET COBINATION If the trampoline and enclosure net combination needs to be moved, it must be done by a minimum of two (preferably four) adults. Keep the trampoline horizontal and lifted slightly. If necessary, it can be taken apart for moving. DISASSEMBLY To disassemble (take apart) the trampoline and enclosure net combination, follow the trampoline and enclosure net combination assembly steps in reverse order.
  • Page 24 MAINTENANCE Your trampoline and enclosure net combination was manufactured using the highest quality materials. It was crafted to provide you and your family with years of enjoyment and exercise. Proper maintenance and care will help to prolong the life of your trampoline and enclosure net combination.
  • Page 25: Trampoline Parts List

    TRAMPOLINE PARTS LIST 15-Foot PTSA15-108 P15D-RE 14-Foot 12-Foot 10-Foot 8 Foot 7 Foot 1. Frame Tube 2. T-Bracket A 3. T-Bracket B 4. Leg Tube 5. Leg Brace 6. Jumping Mat 7. Pad 8. Springs 9. Warning Labels 1 Set...
  • Page 26: Enclosure Parts List

    ENCLOSURE PARTS LIST 15 -Foot 14-Foot 12-Foot 10-Foot 7,8-Foot 1. Enclosure Net 2. Foam Sleeves 3. Bungees w/ Bolts 4. Bungee Bolt Nuts 5. Post Screws Frame Nuts & Bolts 7. Curved Post Section 8. Straight Post Section Specifications are subject to change without notice. Diagram showing numbered parts.
  • Page 27 REPLACEMENT PARTS To order replacement parts please visit our website at www.PropelTrampolines.com. Before visiting the website be sure you know the model number and the number of springs your trampoline has. If you need assistance ordering parts or have others questions about your trampoline please call the customer service number listed in the Information section of our website.
  • Page 28: Available Accessories

    AVAILABLE ACCESSORIES Anchor Kit- Do you like to see your trampoline fly? Neither do we, that's why we carry the "StormRider" trampoline anchor kit. Our Stormrider Anchor kit includes three galvanized steel stakes which connect to your trampoline via high-strength straps.
  • Page 29 Spring Puller (Included with Trampoline) - Need an extra "hand" in assembling your trampoline? Use the included Spring Puller! This useful tool can help make attaching the springs a breeze. (Spring Puller style may vary). Preschool Trampoline- The Propel Preschooler trampoline is a safe and fun trampoline for your little ones.
  • Page 30: My Trampoline Information

    MY TRAMPOLINE INFORMATION In the event you need to contact customer service, such as to ask questions, order replacement parts, or file a warranty claim; you will be asked to provide some basic information about your trampoline. By writing this information in the spaces below and keeping this Manual in an accessible location, you can help expedite this process.
  • Page 31: Limited Warranty

    Propel Trampolines is not responsible or liable for indirect, special, or consequential damages arising out of, or in connection with the use or performance of this product. Propel is not responsible for other damages with respect to any economic loss, loss of property, loss of revenue or profits, loss of enjoyment or use, cost of removal or installation, and any other consequential damages.
  • Page 32: Warranty Registration

    Propel Trampolines Warranty Department 41 East 400 North #324 Logan, UT 84321 www.propeltrampolines.com V1.1 - © 2015 Propel Trampolines - Printed in China Page 32...

This manual is also suitable for:

P15d-re14-foot12-foot10-foot8 foot7 foot

Table of Contents