Length Control; Gs1 Databar Expanded Length 1, Length 2 Programming Instructions - Datalogic Magellan 800i Product Reference Manual

Enter/Exit Programming Mode

Length Control

Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a bar code if the label length falls in the range of the configu-
rable lengths 1 and 2.
04BD00(CR)
Fixed Length Decoding

GS1 DataBar Expanded Length 1, Length 2 Programming Instructions

See page 136for detailed instructions on setting this feature.
NOTE
04BE(CR)
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 2
78
When fixed length decoding is enabled, the scanner
When variable length decoding is enabled, the scan-
For GS1 DataBar Expanded bar codes, only the data char-
acters are included in the length calculations.
GS1 DataBar Expanded / Expanded Stacked
Variable Length Decoding
DEFAULT
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 74
Magellan™ 800i Scanner
04BD01(CR)
04BF(CR)