Eaton SVX9000 Quick Start Manual page 9

STEP 4 (Continued)
Operate Menu — M8
The Operate Menu provides a easy to use method of viewing key numerical
Monitoring Menu items. Some applications also support the setting of
reference values in this menu. The items displayed vary by application. The
table below is an example for the Standard application.
Operate Menu Items — Standard Application Example
Code Signal Name
O.1 Output Frequency
O.2 FreqReference
O.3 Motor Speed
O.4 Motor Current
O.5 Motor Torque
O.6 Motor Power
O.7 Motor Voltage
O.8 DC-Bus Voltage
O.9 Unit Temperature
O.10 MotorTemperature
R1 Keypad Reference
The menu is navigated by using the left and right arrow buttons. If a
reference level is available for setting, the up and down arrow buttons adjust
the value. To exit the Operate Menu to access the other menus, depress the
ENTER button for 2 seconds. While in the other menus, if there is no keypad
activity, the display will return to the Operate Menu after 30 seconds.
SVX9000 Drives MN04003009E—November 2011 www.eaton.com
Unit Description
Hz Output frequency
Hz Frequency reference
rpm Calculated motor speed
A Measured motor current
% Calculated torque based on nominal motor
torque
% Calculated power based on nominal motor
power
V Calculated motor voltage
V Measured DC-bus voltage
°C Heatsink temperature
% Calculated motor temperature based on the
motor nameplate information and the
calculated motor load
Hz Keypad frequency reference setting
8