Summary of Contents for EE Tools EeRom-8U
- Page 1 ROM Emulator for USB EeRom-8U User’s Guide EE Tools, Inc. 4620 Fortran Dr. #102 San Jose, CA 95134 www.eetools.com support@eetools.com Tel: (408) 263-2221 Fax:: (408) 263-2230...
-
Page 2: Disclaimer
E. E. Tools, Inc. to notify any person of such revision or changes. EEROM-8U and the E. E. Tools logo are trademarks of E. E. Tools, Inc. INTEL is a trademark of Intel Corporation. -
Page 3: Table Of Contents
Chapter 2 ................................9 I. USB DRIVER SETUP AND INSTALLATION ..................10 1. To Install USB Driver ....................10 2. To Install EeRom-8U Software ................10 Chapter 3 ................................. 12 I. HARDWARE SETUP AND INSTALLATION ..................13 1. EeRom-8U Features ....................13 2. - Page 4 File is not a raw binary image of the EPROM ............. 29 1. Calling Customer Support ........................30 2. Service Information ..........................30 3. Limited One-Year Warranty ........................31 Chapter 6 Appendix ............................32 PIN ARRAY OF EeRom-8U .......................... 33 OPTION BOARD ............................33 www.eetools.com - 4 -...
-
Page 5: Chapter 1
EeRom-8U User’s Guide Chapter INTRODUTION AND REQUIREMENT - 5 - www.eetools.com... -
Page 6: Introduction
EeRom-8U User’s Guide I. INTRODUCTION EeRom-8U ROM Emulator is aimed at developers who focus on making ROM based programs and data including embedded systems, BIOS, video games, robotics, printer drivers, graphic controller, postscript interpreters, character font libraries, and other ROM based application. In general, the emulator is used during program and data developing period to eliminate the frustration of repeated EPROM burn-erase cycles. -
Page 7: System Requirements
Floppy drive for installation (unless obtained on the Internet, www.eetools.com OS: Windows 98/ME/2000/XP TARGET SYSTEMS Your target board requires the following memory type for proper emulation with EeRom-8U. The basic EeRom-8U unit supports 8Mbits with 45NS memory. EeRom-8U Software Setting For supporting for Target Memory... - Page 8 EeRom-8U User’s Guide Supported PLCC Socket PLCC 32 Pin; ADP28:32PLCC-TO-28DIP, ADP32:32PLCC-TO-32DIP) Memory Size Supported Memory Type (Bytes) 2764 2764/A, 27C64, 27HC64 27128 27128/A/B/D/DI, 27C128 27256 27256, 27C256, 27H256, 27BV256, 27LV256 27512 27512/AS, 27C512, 27LV512 27010 128K 27C010, 27H010, 27HB010, 27LV010/A/L...
-
Page 9: Chapter 2
EeRom-8U User’s Guide Chapter SETUP AND INSTALLATION - 9 - www.eetools.com... -
Page 10: Usb Driver Setup And Installation
I. USB DRIVER SETUP AND INSTALLATION 1. To Install USB Driver If you are the first time user, when you connect EeRom-8U and USB Cable, PC will install Hardware Wizard by Plug and Play function in order to find the corresponding drive. As following the Hardware Wizard, choose ERUSB.INF provided with the instrument and install... - Page 11 EeRom-8U User’s Guide Picture 2. Choosing the directory for installation 3). Click “Program” from the “Start” menu, and select program folder. Picture 3. Selecting program folder 4). After this is done, go back to Program Folder that you typed and run the program.
-
Page 12: Chapter 3
EeRom-8U User’s Guide Chapter SETUP AND INSTALLATION www.eetools.com - 12 -... -
Page 13: Hardware Setup And Installation
2). Up to 8 instruments can be connected, and the Software supports 16bit Split Mode and 32bit Split Mode as well. 3). USB Since EeRom-8U uses 5V power from USB Cable, no additional Target power or power adaptor is required. -
Page 14: To Install Hardware
1). Connect EeRom-8U and PC using USB Cable. 2). Check that a red light of Power LED is on. 3). Select EeRom-8U switch to either 3.3V or 5V depending upon Target power, and plug it in Target 4). Plug Cable’s socket in where Target memory is placed after checking the pin number. - Page 15 Duration is selected correctly. (For example, ‘0’ is selected as a default value for Reset Duration.) Reset Duration is the time period that Reset Signal is maintained. - If you have any further questions, please contact with our technical assistances. Picture 5. EeRom-8U Driver showed in Device Manager - 15 - www.eetools.com...
-
Page 16: Software Setup And Installation
EeRom-8U User’s Guide II. SOFTWARE SETUP AND INSTALLATION Picture 6. EeRom-8U Software. 1. Toolbar Icons . Project Open : Opening existing project or making new project. The file type is *.erp. Picture 7. Project Open Dialogue Box www.eetools.com - 16 -... - Page 17 EeRom-8U User’s Guide Project Save : Saving new project or changes made to project. File Add : Adding new file to project. Picture 8. Add File Dialogue Box File Remove : Remove file from project. Buffer Editor : Show the data of added files to project in order.
- Page 18 Double clicking icon in Tray Icon Box results will be same. Download : Loading each file to Buffer and download it to EeRom-8U that is assigned from Project Control Page. Upload : Sending the data that is downloaded to EeRom-8U device to PC Buffer and showing in Buffer Editor.
-
Page 19: Operation Menu
Edit Buffer : Showing added files to project in order. 3). Transfer File Download : Loading each file to Buffer and downloading it to EeRom-8U that is assigned from Project Control Page. File Upload : Sending data that is downloaded to EeRom-8U device to PC Buffer Verify : Comparing file that is loaded in Buffer and data that is downloaded in EeRom-8U and showing errors if any occurs. -
Page 20: Target
“Find EeRom-8U” Button : While using program, if additional EeRom-8U is connected or if Serial number and Hardware version of the connected EeRom-8U do not appear, click this button to find currently connected EeRom-8U and to rearrange Serial number in order. - Page 21 It also indicates the last EeRom unit when your data selected in “EEROM Control” section is larger than the EeRom memory size. Configured Size of Memory : Showing Memory Type of the selected EeRom-8U at “EEROM Control” section. Picture 13.
-
Page 22: Option
Operating Option : Selecting option for when clicking Download or Target Run button of program. This option is not saved to project and is applied whenever program is executed. Verify after data file writing into EeRom-8U : After file downloading file, perform www.eetools.com - 22 -... - Page 23 EeRom-8U User’s Guide Verification. -- Verify after data file reading from EeRom-8U : After file uploading, perform verification. -- Default Buffer Value : Filling out empty portion of Buffer Editor with the value. - 23 - www.eetools.com...
-
Page 24: Chapter 4
EeRom-8U User’s Guide Chapter EeRom-8U QUICK-START TUTORIAL www.eetools.com - 24 -... -
Page 25: Key Performing Example
16bit(Even, Odd) and 32bit(Word0, Word1, Word2, Word3). After loading file, this program performs within Buffer, and there is no effect to original file. 1). If downloading file with splitting to 16bit, 2 EeRom-8U instruments, and if it is 32bit, 4 instruments are required to be connected. -
Page 26: Chapter 5
EeRom-8U User’s Guide Chapter TROUBLESHOOTING & TECHNICAL SUPPORT www.eetools.com - 26 -... -
Page 27: Regardless Of The Symptom, Verify The Following
EeRom-8U User’s Guide Regardless of the symptom, verify the following: There are no “dongles”, security keys, switch boxes or other devices between the EeRom-8U download cable and the USB port. The target is powered up. All download, daisy-chain and target interface cables are tight and fully inserted. -
Page 28: Verifies, But Target Does Not Run
For example, if the file is 60,000 bytes long, it would load into an EeRom-8U and verify properly. However if the emulator is configured to emulate a 27256, the target would see only the first 32Kbytes mirrored into both halves of the 64KByte space. -
Page 29: File Is Not A Raw Binary Image Of The Eprom
EeRom-8U User’s Guide In general, small EPROMs (<1Mbit) generally have one pin out and larger EPROMs have a different pin out. Most FLASH chips are pinned out like large EPROMs. However, SOME small FLASH are wired like SMALL EPROMs. In general, large devices (>=1Mbit) use a 32 pin DIP to 32 pin PLCC adapter. -
Page 30: Calling Customer Support
Have the following information ready when you call: - The invoice number for the user who bought the EeRom-8U from E.E. Tools. - The distributor's name and the purchased date. - The model & serial number found in the posterior side of the programming module. -
Page 31: Limited One-Year Warranty
EeRom-8U User’s Guide 4620 Fortran Drive #102 San Jose, CA 95134, USA TEL: (408) 263-2221 FAX: (408) 263-2230 Email: support@eetools.com Include with the instrument your complete return shipping address, contact name, phone number, and description of problem. 3. Limited One-Year Warranty E.E. -
Page 32: Chapter 6 Appendix
EeRom-8U User’s Guide This warranty gives you specific rights and you may have other rights, which vary from state-to-state. Model Number:___________________ Date Purchased:______________ Chapter APPENDIX www.eetools.com - 32 -... -
Page 33: Pin Array Of Eerom-8U
EeRom-8U User’s Guide PIN ARRAY OF EeRom-8U ▶ When using EERom-8U for supporting 8bit data bus OPTION BOARD 1.ADP32: Conversion Adaptor from 32-PLCC to 32-DIP 2.ADP28: Conversion Adaptor - 33 - www.eetools.com... - Page 34 EeRom-8U User’s Guide from 32-PLCC to 28-DIP www.eetools.com - 34 -...
- Page 35 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EETools EEROM-8U...
Need help?
Do you have a question about the EeRom-8U and is the answer not in the manual?
Questions and answers