Running A Remote Desktop Session - Keysight Technologies PXA N9030A Getting Started Manual

Using Windows Tools
Remote Desktop: Using the X-Series Signal Analyzers Remotely
Table 4-6
Step
1. Click
2. Double-click

Running a Remote Desktop session

Initializing a Remote Desktop session
To initialize a Remote Desktop Session, you need to know the Computer
NOTE
Name of the instrument. This information can be shown on the instrument
display by following the procedure in the section
computer name of the instrument" on page
After setting up both the instrument and the remote computer for Remote
Desktop Connectivity, as described in
on page
Table 4-7 Starting a session
Step
1. Click
Accessories
Remote Desktop Connection.
2. Enter the computer name of the
instrument.
3. Click
Locating the name from the Windows desktop (with a mouse):
Start Control Panel
,
System
80, you are ready to start a Remote Desktop session.
Start All Programs
> >
Communications
>
Connect
.
Notes
.
The Computer name is listed in the Computer
name, domain, and workgroup settings
section.
82.
"Setting up Remote Desktop operation"
Notes
A Remote Desktop Connection dialog appears:
>
A login dialog box appears.
83
"How to locate the