Ryobi AIRgrip ProCross ELL0006 Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Laser Level
  5. AIRgrip ProCross ELL0006
  6. Operator's manual

Ryobi AIRgrip ProCross ELL0006 Operator's Manual

Self-leveling
Hide thumbs

Advertisement

Table of Contents

Your laser level has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNINg:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAvE THIS MANUAL fOR fUTURE REfERENCE
OPERATOR'S MANUAL
AIRgrip
ProCross
™
SELf-LEvELINg
ELL0006
LASER LEvEL
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIRgrip ProCross ELL0006 and is the answer not in the manual?

Questions and answers

Related Manuals for Ryobi AIRgrip ProCross ELL0006

Summary of Contents for Ryobi AIRgrip ProCross ELL0006

  • Page 1 Your laser level has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNINg: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

  • Page 2: Table Of Contents

     Introduction ...   General Safety Rules ... 3  Symbols ... 4-5  Features ... 6-7  Assembly ... 8  Operation ... 8-11  Maintenance ... 1  Troubleshooting ... 13  Parts Ordering / Service ... Back Page This product has many features for making its use more pleasant and enjoyable.

  • Page 3: General Safety Rules

     Do not operate the laser level around children or allow children to operate the product. Serious eye injury could result.  Always turn the laser level off when not in use. Leaving the product on increases the risk of someone inadvertently staring into the laser beam.

  • Page 4: Symbols

    Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current Direct Current No Load Speed...

  • Page 5: Symbols

    To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand com- pletely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance.

  • Page 6: Features

    fEATURES PRODUCT SPECIfICATIONS Recommended Use...Indoors AIRgrip Power Supply ...  AA, 1.5 Volt Alkaline Batteries Laser Power Supply ...  AA, 1.5 Volt Alkaline Batteries Battery Life for AIRgrip Vacuum ... 4 Hours Continuous Use Battery Life for Laser ... 40 Hours Continuous Use Operating Temperature...3°F to 104°F Laser ...Class IIIa, <...
  • Page 7 — horizontal mode, vertical mode, or crosshair mode. MULTI-fUNCTION BASE The multi-function base allows the laser level to be used on irregularly shaped walls or objects. It features built-in loops for a hook-and-loop strap, angled holes for push pins, and storage compartments for the push pins and the 1/4 in.

  • Page 8: Assembly

     Lining up floor or wall tile INSTALLINg BATTERIES See Figures 3 - 4. There are two battery compartments for the laser level, one for the AIRgrip vacuum and one for the laser. To install batteries for the AIRgrip vacuum:  Locate the battery compartment on the base of the laser...
  • Page 9  To reposition the laser level while it is adhered to a sur- face, depress the vacuum release button while allowing the AIRgrip vacuum to continue running. This will release the seal enough to allow you to slide the unit to a different position.
  • Page 10  Align push pin with angled hole located on one side of laser level base and push in to secure.  In the angled hole on the other side of laser level base, secure the second push pin. OPERATION Fig.

  • Page 11: Operation

    CAUTION: Use caution when using laser level in base. Do not orient in a way that will allow the laser level to slide or fall out of the base. OPERATINg THE LASER LEvEL See Figures 10 - 11.

  • Page 12: Maintenance

     Do not disassemble the laser level. This could cause exposure to hazardous laser radiation.  Do not attempt to change any part of the laser lens.

  • Page 13: Troubleshooting

    Replace batteries. Press on/off button. Replace batteries. Dim light in the work area or use laser-enhancing glasses. Relocate laser level so that line is projected within specifications listed earlier in this manual. Press the on/off button. Replace batteries. Replace batteries.
  • Page 14 Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model number of this product will be found on a label attached to the laser level. Please go to www.ryobitools.com to register this product.

Table of Contents

Save PDF