Page 1
Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE. Model #1305 SNAP N GO Instruction Manual Convenience through innovation and thoughtful design 10.05...
Page 2
Excessive weight may cause a hazardous unstable condition to exist. • Be certain the stroller is fully erect and latched in the open position before allowing the child near the stroller. • Use of the stroller with a child weighing more than 25 pounds will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
Page 3
• Lean the stroller forward to rest on the front wheels. To attach the rear wheels, position the rear axle and wheel assembly such that the brake levers are facing to the rear of the stroller. Press the rear wheel assembly onto the rear frame tubes being careful that the push buttons on the forward side of each rear tube engage the hole on the forward side of each rear wheel housing.
Page 4
TO FOLD STROLLER: Do Not allow children near stroller while folding. • To fold the stroller slide the red handle in the center of the handle to the left and squeeze while pushing forward on the handle. Once the stroller begins to fold, release the red handle and pull backward on the front frame until stroller is folded.
• Release the folding latch, which is located on the right side. See fi gure 8. • Lift up on the stroller handle with both hands until the stroller frame is erect and locked in the open position. See fi gure 9. The stroller has spring-loaded latches on both sides of the frame.
Need help?
Do you have a question about the SNAP N GO 1305 and is the answer not in the manual?
Questions and answers