Hardware Setup; Rack Mounting - ATEN VM0404HB User Manual

1. Important safety information regarding the placement of this
device is provided on page 85. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.

Rack Mounting

The VM0404HB / VM0808HB can be mounted in a 19" (1U) system rack. For
the most convenient front panel pushbutton configuration and operation at the
local site, mount the unit at the front of the rack, as follows:
1. Use the M3 x 6 Phillips head hex screws supplied with the Mounting Kit
to screw the rack mounting brackets onto the front of the unit.
2. Position the unit in the front of the rack and align the holes in the mounting
brackets with the holes in the rack.
3. Screw the mounting brackets to the rack.
Phillips Head Hex Phillips Head Hex
M3 x 6 M3 x 6

Hardware Setup

Chapter 2
11