Important Safety Instructions Keep these instructions. apparatus has been exposed to rain or moisture, does not operate normally, or has For ZVOX Audio System Heed all warnings. been dropped. Follow all instructions.
Page 3
Quick Setup Guide INPUT POWER STANDARD HEADPHONE MINIJACK 15 VD C OPTICAL OPTICAL DIGITAL SUBWOOFER /ANALOG POWER INPUT OUTPUT INPUT DIGITAL HDMI 1 HDMI 2 2d/2A AUDIO MINIJACK ACCUVOICE SURROUND VIDEO Back of TV MUTE VOLUME 1 Place The ZVOX Speaker 2 Connect Power Cord 3 Connect the Optical Signal Cable 4 Turn down your TV’s sound and...
Page 4
Alternative Ways To Connect The AccuVoice TV Speaker If your TV doesn’t have an optical audio output, here are some other options: Back of Cable/Sat Set Top Box Back of TV Back of TV Minijack Analog Audio Out Red and White RCA Jack Analog Audio Out Connect To Your Cable Or Satellite TV Set Top Box Many TVs have an audio output minijack (sometimes labeled “3.5mm”) or Some TVs use red/white RCA jacks for the analog audio output.
When MUTE function is active, the display will the TV Speaker remote control to choose the second input. An analog signal size for the hanger mounts on the rear of the ZVOX speaker. ZVOX Audio show a blinking -00- for 20 seconds.
Page 6
End Panel Controls on the Surround Settings Other Settings Button There are three SURROUND levels: The Other Settings button allows Bass and Treble adjustment and turns Output AccuVoice TV Speaker Leveling On and Off. • Surround One (“Sd 1”) has low virtual surround effect and strong vocals.
Need help?
Do you have a question about the AccuVoice AV203 and is the answer not in the manual?
Questions and answers