Attaching The Shoulder Strap - Ryobi PBC3046B Operator's Manual

ATTACHING THE SHOULDER STRAP

See Figure 3.
1. Connect the latch on the shoulder strap to the
strap hanger.
2. Adjust the strap to a comfortable position.
NOTE: To quickly release the product from the shoulder
strap, sharply pull the quick release tab.
QUICK
RELEASE
TAB
LATCH
STRAP HANGER
SILENCER GUARD ASSEMBLY
See Figure 4.
1. Remove silencer guard and two screws from the
owner's kit.
2. Attach the silencer guard to the rear housing.
NOTE: Make sure the bent end of the silencer guard fits
securely into the opening of the rear housing.
3. Using the torque wrench supplied, install the two screws
and tighten securely.
ASSEMBLY
SHOULDER
STRAP
Fig. 3
8
TORQUE
WRENCH
SCREWS
SILENCER
GUARD
GRASS DEFLECTOR AND BLADE GUARD
USE
NOTE: When converting from brushcutter to trimmer, or
trimmer to brushcutter, make sure the correct guard/
deflector is being used. See Figure 5.
REAR HOUSING
BENT END OF
SILENCER GUARD
OPENING IN REAR
HOUSING
Fig. 4
GRASS DEFLECTOR FOR
TRIMMER USE
BLADE GUARD FOR
BRUSHCUTTER USE
Fig. 5