KAM DDX750 Instruction Manual

KAM DDX750
DIRECT DRIVE TURNTABLE
OVERVIEW
The KAM DDX750 turntable is
designed to give the DANCE DJ,
MOBILE DJ, PUBLIC HOUSE AND
SMALL CLUB INSTALLATION
maximum flexibility and features
for minimum cost. This turntable
combines all the features required
r
while maintaining a high level of
build quality and specification.
The turntable comes
complete with:
1 x headshell
1 x 45rpm adaptor
1 x counterweight
t
1 x platter
1 x cartridge
1 x connecting cable
1 x searchlight
1 x Kam slipmat
and this manual.
OPERATING INSTRUCTIONS
1. Turn the power button/strobe clockwise to turn on
the power, the speed indicator and the strobe
illuminator will light up.
2. Place a record on the slipmat. When playing a
45rpm record with a large centre hole, put the
45rpm adaptor on the centre spindle.
3. Set the speed to match the record.
4. Remove the stylus protector and release the
tonearm clamp.
5. Set the cueing lever to the up position.
6. Press the Start/Stop button, the turntable platter
will start to rotate.
7. Move the tonearm over the desired groove.
8. Set the cueing lever to the down position, the
tonearm will descend slowly onto the record and play
will begin.
9. When play is finished, raise the cueing lever, move
the tonearm to the arm rest and secure the tonearm
will the arm clamp.
q
w
e
u
1$
y
10. Press the Start/Stop button to stop the platter
rotating. Turn the power button anti-clockwise to turn
off the power.
To suspend play, set the cueing lever to the up
position during play. The stylus tip of the cartridge will
be lifted from the record.
q 45rpm ADAPTOR
w KAM SLIPMAT
e CENTRE SPINDLE
r STROBE DOTS
t POWER SWITCH / STROBE
y START / STOP BUTTON
u HEADSHELL
i SPEED SELECT BUTTON
o PITCH CONTROL SLIDER
1) TONEARM
1! ANTI-SKATING KNOB
1@ COUNTERWEIGHT
1# POSITION FOR PREPARING CARTRIDGE
1$ SEARCHLIGHT
SPECIFICATION
Turntable Type
1# Motor
Drive method
Platter
1@
Speeds
Wow & flutter
1!
S/N ratio
Pitch controls
Start time
Speed change
Speed tolerance
High of cue (first track)
Descend of cue
1)
Tonearm Type
Length
Overhang
Tracking error
o
Tracking adjustment
Cartridge weight
Anti skating range
Cartridge tracking force
General Power supply
Power consumption
i
Dimensions
Weight
Due to continuous product development, specifications are subject to change.
INSTRUCTION MANUAL
2 speed full manual
DC motor
Direct drive
330mm aluminium
33.3rpm + 45rpm
Less than 0.15 WRMS
More than 50dB
±10%
Less than 1 sec
Less than 1 sec
Within ±1.3%
6-10mm
5 sec
Static S shaped
220mm
10mm
Less than 3 degree
3-4g
6-10g
0-4g
0-4g
AC 240V, 50Hz
9 Watts
450 x 350 x 139mm
4.68Kgs