GARDINER TECHNOLOGY Gardtec 500 series User Manual

Gardiner Technology
Gardtec 500 Series User Manual
Operating Gardtec 500
To alleviate any possibility of error, always insert 0 (zero) in front of a user code entry.
0 (zero) should not be used as part of a user code.
Function
To Set System
To Unset System
Isolating Zones
(ie night set or garage set)
NB:- After unsetting the
system after zone omits
the display will identify the
zones omitted during the
last setting
Changing the User Code
NB:- Remember not to use
a 0 (zero) as part of a code
Chime Function
(for walk testing detectors
or identifying area
movement)
To remove chime function
press 0 (zero)
Sounder Test
To Read Event Log
(last 13 events)
To Clear Display
Quick Set Option
MCM Alarms – The Old Dairy – 77 Robinson Road – Rushden – Northamptonshire – NN10 0EH
Tel:- 0870 749 0263 – Fax:- 0870 749 0264 – Email
Action
Enter User Code
a) Enter premises via entry
route
b) Enter User Code
Enter User Code followed
*
by
and zone number.
(for multiple zone omits
enter code - * zone no *
zone no etc)
a) Enter the user code
*9
b) Enter followed by the
new code
c) Press 0 (zero) to clear
display
Enter 0 # 6
Enter 0 # 9
Enter 0 # 8
If the display scrolls
between U (unset) and any
zone information press 0
(zero) to clear after
investigating cause of
activation)
Enter 0 # 4
support@mcmalarms.co.uk
Result
Exit sounder commences
continuous tone during exit
time
Entry sounder starts
intermittant tone
Entry sounder silences
Exit sound starts
continuous tone for
duration of exit time
a) Exit sounder starts
b) Sounder silences and
display shows the new
code in sequence followed
by U
c) Panel returns to unset
Movement through any
detector while system is
unset creates a 2 second
tone
External sounder & strobe
will sound for 10 seconds
follwed by internal sounder
for 10 seconds
Display will scroll through
last 13 events of activation
Normal set procedure
– Web:- www.mcmalarms.co.uk
Display
st nd
1 2
U
-
-
U
st nd
1 2
h -
U
? ? ? ?
U
U
U
1 2 3 4 5 - - - - 13
? ? ? ?
U
U