Yamaha MONTAGE 6 Supplementary Manual page 33

MIDI I/O
You can now switch Scenes by Control Change messages.
[UTILITY]  [Settings]  [MIDI I/O]
Operation
Scene CC (Scene Control Change Number)
Determines the Control Change Number generated by switching Scenes. Even when the instrument receives MIDI message
with the same Control Change Number specified here from the external equipment, the instrument assumes that the message is
generated by switching Scenes.
Settings:
Off, 1 – 95
NOTE Scene 1 – 8 is selected depending on the Control Change value.
0 – 15: Scene 1, 16 – 31: Scene 2, 32 – 47: Scene 3, 48 – 63: Scene 4, 64 – 79: Scene 5, 80 – 95: Scene 6, 96 – 111: Scene 7, 112 – 127:
Scene 8
NOTE When the same Control Change Number is set to both of the Super Knob Control Change and the Scene Control Change, an
exclamation mark (!) is shown before the value. In such a case, changes to Scene Control have priority and changes to the Super Knob
Control are ignored.
MONTAGE Supplementary Manual
Scene Control Change Number
33