Service And Maintenance; Firmware Update Using Http - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Service and maintenance

5.1

Firmware update using HTTP

5.1.1 Firmware update using HTTP
Requirement
● The device has an IP address and is reachable.
● WBM has been started and the "admin" user is logged in.
Firmware update using HTTP
1. Click "System" > "Load&Save" in the navigation area. Click the "HTTP" tab.
2. Click the "Load" button next to "Firmware".
3. Go to the storage location of the firmware file.
4. Click the "Open" button in the dialog. The firmware file is downloaded. The firmware itself
is signed and encrypted. This ensures that only authentic firmware is downloaded to the
device.
5. If the file is loaded successfully, the following dialog is displayed.
6. Click "OK" to restart the device. If you click "Cancel", you will need to restart the device
later with "System" > "Restart".
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
5
169