Usb Applications; Led Indicators - TP-Link Archer VR2800 Quick Installation Manual

Already have a modem?
If you already have a modem or your internet comes directly from an Ethernet
wall outlet, you can switch to Wireless Router mode. Follow the steps below
to set up.
1. Connect the hardware and wait until the Power LED
Modem
Modem Router
Ethernet Cable
2. Connect your device to the router via an Ethernet cable or wirelessly.
The SSIDs (network names) and wireless password are printed on the Wi-Fi Info Card
included in the package.
3. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a password for router management and get started.
Note: If the login page does not appear, please refer to FAQ > Q1.
http://tplinkmodem.net
4. Follow the Quick Setup and select Wireless Router Mode to connect to
the internet.
If there is no Operation Mode selection page in the Quick Setup, go to the
Advanced > Operation Mode page and switch to Wireless Router Mode,
then go to Basic > Internet to finish the set up.
Now you can enjoy the internet.
FAQ
(Frequently Asked Questions)
Q1. What should I do if I cannot access the web management page?
A1. If the computer is set to a static IP address, change its settings to obtain an IP address
automatically.
A2. Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web
browser.
A3. Use another web browser and try again.
A4. Reboot your modem router and try again.
A5. Disable then enable the network adapter in use.
Q2. What should I do if the DSL LED does not turn solid on?
A1. Check your cables and make sure they are all plugged in correctly, including the
telephone lines and power adapter.
A2. Restore your modem router to its factory default settings.
A3. Remove the DSL splitter, directly connect the modem router to the phone jack and
follow this guide to reconfigure the modem router.
A4. Contact your ISP (internet service provider) to check the status of your DSL line.
A5. If the problem persists, contact our Technical Support.

USB Applications

USB ports can be used for printer, file and media sharing, both locally over
your home network and remotely over the internet using the router's built-in
FTP server capability.
becomes stable.
Power Adapter
Remote Access
via FTP Server
To learn more about the USB features, visit
http://tp-link.com/app/usb or scan the QR code.
Support
For detailed configuration instructions and more supported features
(including TP-Link Cloud service, Guest Network, Parental Controls and
QoS) please refer to the User Guide available from this product's support
page at www.tp-link.com.
For technical support and other information, please visit
http://www.tp-link.com/support.
Q3. What should I do if I cannot access the internet?
A1. Make sure all telephone and Ethernet cables are correctly and securely connected to the
modem router.
A2. Try to log in to the web management page of the modem router using the default address
at http://tplinkmodem.net or http://192.168.1.1. If you cannot, change your computer
settings to obtain an IP address automatically from the modem router. If you can, try the
steps below.
A3. Ask your internet service provider for the VPI/VCI (or VLAN ID), Connection Type, internet
service username and password, and make sure all are correctly entered into your router's
management page.
A4. Restore the modem router to its factory default settings and reconfigure it by following the
instructions in this guide.
A5. Please contact our Technical Support if the problem persists.
Q4. What should I do if I forget my password?
For the web management page:
A1. If you are using a TP-Link ID to log in, click Forgot password on the login page and then
follow the instructions to reset it.
USB Ports
Local Storage
Media Sharing Printer Sharing
Sharing

LED Indicators

LED Status Indication
On System initialization is complete.
Flashing The system is initializing or the firmware is being upgraded.
Power
Do not disconnect or power off the modem router.
Off Power is off.
On DSL synchronization is complete.
Flashing DSL synchronization is in progress.
DSL
Off DSL synchronization failed.
White Internet service is available.
Internet Orange Internet connection is correct but internet service is
unavailable.
Off Internet connection is incorrect, DSL synchronization
failed, or the modem router is operating in Bridge mode.
Wireless On The 2.4GHz wireless radio band is enabled.
2.4GHz Off The 2.4GHz wireless radio band is disabled.
Wireless On The 5GHz wireless radio band is enabled.
5GHz
Off The 5GHz wireless radio band is disabled.
On
At least one LAN port is connected.
LAN
Off
No LAN port is connected.
On
The USB device is ready to use.
USB Flashing A new USB device is being identified.
Off
No USB device is plugged into the USB port.
Turns On when a WPS synchronization is established and
On/Off
automatically turns Off about five minutes later.
WPS
A wireless device is trying to connect to the network via
Slow Flashing
WPS. This process may take up to 2 minutes.
Note: You can turn the LEDs on or off by pressing the LED On/Off button.
A2. Alternatively, restore the modem router to its factory default settings and then set a
new password.
For the Wi-Fi network:
A1. The default Wi-Fi Password/PIN can be found on the Information Card that came in your
modem's packaging or on the product label at the bottom of the modem router.
A2. If the default wireless password has been changed, log in to the web management
page and go to Basic > Wireless to retrieve or reset your password.
Q5. How do I restore the modem router to its factory default settings?
A1. With the modem router powered on,
press and hold the Reset button on the
rear panel of the modem router for
approximately 10 seconds until all LEDs
turn back on, then release the button.
Reset Button: Press & Hold for 10 Seconds
A2. Log in to the web management page of the modem router. Go to Advanced > System
Tools > Backup & Restore and click Factory Restore. The modem router will restore
and reboot automatically.