Slime 50063 Instructions

Truck spair emergency flat tire repair

Download this manual

POWER SOURCE

• Plugs into 12 volt

15 amp accessory outlet

• 10' (3m) length

AIR ADAPTERS AND

ALUMINUM

INFLATION NEEDLE

VALVE CAPS

ATTENTION! READ ALL INSTRUCTIONS CAREFULLY

FAILURE TO FOLLOW WARNING INSTRUCTIONS CAN RESULT IN FIRE,

PERSONAL INJURY OR PROPERTY DAMAGE.

TRUCK SPAIR

EMERGENCY FLAT TIRE REPAIR

BRIGHT LED LIGHT

• For nighttime

emergencies

PENCIL GAUGE

VALVE CORE REMOVAL TOOL

REPLACEMENT

VALVE CORES

24 oz. (710 mL) BOTTLE

OF SLIME TIRE SEALANT

• Non-toxic & non-corrosive

• Cleans up with water

• TPMS Safe

TWIST-CONNECT AIR HOSE

REPLACEMENT FUSE

PRO POWER ALLIGATOR CLIPS

• For a direct to battery connection

Need help?

Do you have a question about the 50063 and is the answer not in the manual?

Page 1 TRUCK SPAIR EMERGENCY FLAT TIRE REPAIR 24 oz. (710 mL) BOTTLE OF SLIME TIRE SEALANT • Non-toxic & non-corrosive • Cleans up with water • TPMS Safe POWER SOURCE BRIGHT LED LIGHT TWIST-CONNECT AIR HOSE • Plugs into 12 volt •...
Page 2 CAUTION: HOT! • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON A HARD, CLEAN SURFACE 1. DO NOT run vehicle while inflator is operating. You may need to be in “accessory” or “on” position. Please make sure emergency brake is set and car is in park. Always ensure air hose chuck touches the core of the valve stem for proper inflation.
Page 4: Troubleshooting
1/4” (6mm). Puncturing objects should be removed prior to using Slime. Keep inflator out of reach of children. Always use a tire gauge to check tire pressure. Do not overinflate tire.