Philips AJ2000 Quick Start Manual

Always there to help you
Register your product and get support at
www.philips.com/support
AJ2000
Question?
Contact
Philips
Quick start guide
This product has been manufactured by, and is sold
under the responsibility of Gibson Innovations Ltd.,
and Gibson Innovations Ltd. is the warrantor in
relation to this product.
1
Fully extend and adjust the position of the pig-tail
Philips and the Philips Shield Emblem are registered
antenna until you find the best reception.
trademarks of Koninklijke Philips N.V. and are used
2
Fix the antenna as illustrated.
under license.
AJ2000_79_QSG_V2.0
For first-time use, remove the protective tab to
Always there to help you activate the battery.
Register your product and get support at
www.philips.com/support
Question?
Contact Note:
Philips
•
You can only use AC power as power supply.
The battery can only back up clock and alarm
Quick Start Guide
settings.
Tune to radio stations
CR2032
CR2032
To replace the battery:
1
Push the clip to the left and pull out the battery
tray.
2
Insert 1 x CR2032 battery as illustrated.
Store radio stations manually
Store radio stations automatically
(STANDBY)
Select a preset radio station
X20
Press SLEEP repeatedly to select a time period (in minutes).
» The product switches to standby mode
automatically after the preset period.
» When [OFF] is displayed, the sleep timer is
deactivated.
STANDBY