How To Clean Rollers And Remove Stuck; Or Jammed Films - Royal Sovereign 900NPH-1200N Owner's Manual

HOW TO CLEAN ROLLERS AND REMOVE
1. Cleaning rollers with a clean and thick paper
1) If film adhesive apears on the laminated pouch surface, Insert a sheet of clean, thick
paper (about 0.5mm(1/50") thickness) into the machine 2~3 times on 100℃(212℉)
setting. The paper will attract the excess adhesive from the roller.
Roller Cover
* Do not turn the unit on until the rollers are completely dry. Wet rollers
could cause serious harm.
STUCK OR JAMMED TO FILMS
2. Cleaning rollers with cleaning solvent.
1) When rollers are hot, turn on and set
2) After cooling, the machine automatically stops.
3) Unscrew 2 retaining screws on the cover
4) Use a recommended silicon roller cleaning
5) Re-assemble the unit in reverse-order of
"COLD" mode to cool them down.
by using a screw driver or a coin. Turn them
towards counterclockwise. After remove them,
lift off the cover.
solvent such as Laminex Poly-Off or
equivalent, on a lint-free cloth to clean
residue of laminate adhesive on exposed
roller surface.
You can clean every corner of the rollers
as turn the power switch and make them roll
Prevent any liquid from spilling into the unit.
disassembling.
16