Silvercrest SWK 360 A1 Operating Instructions And Safety Instructions page 46

Arm mount
You will need the following accessories to install the arm mount
♦ Undo the screw cap on the arm mount
♦ Push the ball joint on the ball adapter
♦ Re-tighten the screw cap on the arm mount
♦ Place the thread
tight.
♦ Press the Velcro fastener on the strap firmly at the suitable locations.
♦ Fasten the arm mount
♦ Adjust the Velcro of the strap so that camera is firmly in position.
NOTE
► To adjust the camera, undo the screw cap and move the camera into the required position.
Then re-tighten the screw cap on the arm mount
■ 42 GB│IE│NI
│
.
into the screw cap on the arm mount
on the camera onto the fixture of the ball adapter
on your arm.
:
+ +
.
.
.
and screw the camera
SWK 360 A1