Changing The Temperature Scale - Kinsa Smart Ear Thermometer Instructions For Use Manual

Understanding Your Thermometer Display
DISPLAY
Bluetooth icon,
blinking
Phone with
comment icon,
blinking
Battery icon,
one section
Battery icon,
empty, blinking
ERR
HI / LO

Changing The Temperature Scale

If you wish to change the temperature scale of your thermometer:
Open the battery door
1.
Remove batteries
2.
Use the °C/°F switch
3.
scale for your display
Replace batteries and battery door
4.
NOTE: temperature scale in app can be changed within app settings.
6
SITUATION
No mobile device paired
Thermometer has
stored temperatures or
messages to send to app
Battery is low but
thermometer will still
operate correctly
Battery is critically low
and may not operate
correctly
Ambient temperature is
not within allowed
operating range (59-104
°F or 15-40 °C)
Temperature taken is not
within typical human
temperature range
(93.2-108 °F or 34-42.2 °C)
HI = too high
LO = too low
SOLUTION
Download the Kinsa app & enable
Bluetooth on your mobile device.
Turn on the thermometer while the app is
open and follow pairing instructions.
Open Kinsa app.
Insert new batteries.
Insert new batteries.
Allow the thermometer to remain for 30
minutes where temperature is within
ambient range.
Make sure the probe tip and lens are
clean. Make sure the thermometer is
properly inserted. Then, take a new
temperature.
If you continue to encounter an error,
contact Kinsa Customer Support.
to select the temperature