Thank you for buying this JVC LCD television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Follow this manual regarding setup! • Hold the TV so as not to •...
Connect the power cord only to a should be lock it’s cable follow 110-240V, 50/60Hz AC outlet. picture. ■ When attaching the TV to the wall, use the optional JVC wall mounting unit • Consult a qualified technician. • JVC assumes no responsibility for 1 Microphone 2 Microphones damage due to improper mounting.
emote control buttons and functions [Return Plus] Return to the frequently Power On / Off [Menu Operation] viewed channel Colour buttons • Return Plus Programmed by select Turn on "Clear SD" (P. 8) MENU the frequently viewed channel then Display MENU Turn on "Zoom"...
onnection to External device Make sure all the devices and the TV are turned off. You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setting up. (Connecting cables are not supplied with this TV.) •...
(While the cursor is pointing to Picture menu and hold for 3 seconds.) If you select "Country Area" to If you select "Country Area" to Ê Ê Ê Ê JVC logo appears. "Area-1" "Area-2" • Show only when powering on for the first time. Select the Teletext language group by /.
egistering / Editing channels hannel Summary You can edit the channel list or register new channel manually. You can edit the channel list. • This function is available when select "Country Area" to "Area-1" only. • This function is available when select "Country Area" to "Area-2" only. •...
imple menu Picture Sound Ê Ê Ê Ê Area-1 Area-2 Area-1 Area-2 Picture Picture Sound Sound Stereo / I▪II I II Mono Picture Mode Bright Picture Mode Bright Stereo Mono Backlight Backlight On Air Sound Meister ...
Page 9
• "Closed Caption" available when select "Country Area" to "Area-2" only. (Off / Eco-1 / Eco-2 / Max-Eco) (P. 11) • "Eco Mode" available for model LT-32G2 only. HDMI Setting Setting for HDMI input. (P. 13) Eco Sensor Adjust picture contrast automatically according to the PC Setting Setting for PC input.
Without receiving the aspect information, it will be • Microphone to be used with the "Karaoke" function of JVC must be of the setting in "Auto" in "Zoom" menu. "HIGH GRADE LOW NOISE MICROPHONE CABLE" type, otherwise, Not available in PC mode.
Page 11
seful function (continued) [Eco Mode] Adjusts picture contrast manually according to the brightness [5.1Ch Setting] You can enjoy with 5.1Ch sound. of your room to reduce power consumption. Select "5.1Ch Setting" in "Sound" menu. Deactivates the function. Eco-1 Picture is darkened for the 1st level. Sound >...
Page 12
seful function (continued) [Teletext] You can watch the Teletext broadcasts channel with Text [Closed Caption] Select the caption or text channel. function. Select "Closed Caption" in "Set Up" menu. TV mode TEXT mode Set Up Select a Teletext page by press number button (0-9). Auto Program ...
atching from external source Watching from the PC input To make sure the connection between TV set and the external input as Ê Ê "Connection to the external device". (P. 20) Select "PC Setting" in "Set Up" menu. / To select the input source. AV Select Setting for PC input.
Page 14
atching from external source (continued) Watching from the Multi Media input (continued) Ê Ê Play / pause the slideshow. Select "SETTINGS" in "Home" menu. See the next / previous. [SETTINGS] Setting for Multi Media input. Rotate the photo. Slideshow duration Select how long each picture is displayed for during slide shows.
Page 15
The song that is selected will run automatically. The detail of that song DCIM File name : DCIM JVC demo File type : Folder will be shown inside the frame on the right. After finish the song, the next New Folder (2) will be played accordingly.
roubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. Severe noise or snow Page Poor picture quality Page Unnatural colour >> Adjust "Colour" and "Backlight". Check the aerial cable and TV connections . 3, 5 Check "Colour System".
echnical information Connect "DVI" devices 5.1Ch Out speaker table Ê Ê Ê Ê Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable. Position Connect analogue sound output of the DVI device to PC/HDMI-1 Speaker (ANALOG AUDIO) terminals in HDMI-1. Setting •...
Page 18
echnical information (continued) Language group for Teletext PC Signals that can be displayed Ê Ê Ê Ê • If the signal doesn’t appear, check that the vertical frequency on the PC Group Languages is set to "60Hz". Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish Resolution 640 x 480(VGA) / 1024 x 768(XGA)
H / CC List To use the Insert function (P. 7), find the "CH/CC" number corresponding to the TV’s channel number from this table. : The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR : The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
Main unit Terminals / Connectors Ê Ê Ê Ê Model LT-32G2 LT32G20 Terminal name Terminal type Signal type (IN) Signal type (OUT) Display systems Screen panel: LCD (Liquid Crystal Display) Composite video, Light source: LED (Light Emitting Diode) Edge backlight...