Table of Contents
Advertisement
Electrical connection
Warning!
This appliance must be earthed.
Mains Supply could be connected to the Mains Voltage by Direct Connection.
EUR
Warning!
Make sure the fused spur outlet is located in an accessible position.
Direct Connection
•
If the appliance is being connected directly to the mains, an omnipolar circuit-breaker
must be installed with a minimum opening of 3 mm between contacts.
•
If the cable is damaged or to be replaced, the operation must be carried out by a
qualified electrician with dedicated tools to avoid any accidents.
•
The installer must ensure that the correct electrical connection has been made and
that it complies with wiring diagram.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorized technicians only.
All installation work must be carried out by a competent person or
qualified electrician.
Before connecting the mains supply, ensure that the mains voltage
corresponds to the voltage on the rating plate on the appliance.
UK
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
FUSE ON
USE A 13 AMP FUSE
35
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLMFBK60 and is the answer not in the manual?
Questions and answers
What are the dimensions so I can replace it
The temperature of the oven is lower than the temperature set on **** setting, how can this be calibrated
Why does the oven temperature setting keep flashing?
I’ve just replaced my oven. When trying to use grill setting it doesn’t heat up if door is open. I’ve always had to grill with door open in the past so want to check if I’m doing incorrect