Table of Contents
Advertisement
With the Popcorn sensor the
microwave starts with a set microwave
power level and cooking duration.
The microwave power level is preset at
850 W and the duration at 2:45 minutes.
This is suitable for most brands of
microwave popcorn.
Notes on using this
programme
– The oven interior must be cool and
dry in order for the popcorn to pop
completely.
– Follow the manufacturer's
instructions on the packet.
Change the preset time if necessary.
You can set a maximum duration of
4 minutes (see "Settings - Popcorn").
The microwave power level cannot
be changed.
Insert the condensate tray on the
lowest shelf level and place the
microwave popcorn on it, taking note
of the manufacturer's instructions.
Touch .
The cooking duration starts and the
duration (time remaining) begins
counting down in the display.
You can interrupt the cooking process
at any time with
with .
Do not leave the steam oven
unattended during this programme
and make sure you follow the
instructions on the packaging.
and cancel it
Stop
At the end of the cooking
duration
–
Process finished
display,
– a buzzer will sound if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones").
Popcorn
appears in the
59
Advertisement
Table of Contents
