MRSTEAM STEAMLINX A Installation Instructions

SteamLinx Module and Mobile App allows for seamless
control of time and temperature using your smart phone
or mobile device. SteamLinx works with all MrSteam
controls (for MS generators SN 1174000 and up).
These instructions contain safety alert symbols and panels. These alert symbols
and panels identify potential safety hazards and provide important information
for the installation and use of SteamLinx.
Read the Installation, Operation and Maintenance Manual for Steambath Generator
Systems (PUR100472) before installation of SteamLinx to insure safety and proper
installation of the steam Generator. A free replacement manual is available by
calling MrSteam Customer Service, or it can be downloaded from mrsteam.com
All drawings for schematic purposes only.
1 Connecting SteamLinx A to the Steam Generator
• Disconnect power to the generator at the breaker box.
To prevent shock hazard, disconnect power
at the breaker box before removing generator cover.
1.2
Circuit
Board
Cover
Screws
• Locate the circuit board.
1.3
• Plug the SteamLinx A into the white
connector located at the far left side
of the circuit board.
• Replace cover and screws.
• Restore power.
ELECTRICAL SHOCK HAZARD.
MrSteam steam generators are connected to
240V line voltage and contain live electrical
components. All installation and service must be
performed by a licensed and qualified electrician.
I N S TA L L AT I O N I N S T R U C T I O N S
Generator
Cover
• Remove knock-out.
• Remove generator cover.
A
– –––––––––––
GENERATOR
• Route the SteamLinx A cable through
the knockout.
MrSteam steam generators are connected to
240V line voltage and contain live electrical
Knock-out in
components. All installation and service must be
the Generator
performed by a licensed and qualified electrician.
Jacket
Package Contents:
• SteamLinx A with Integral Cable
• SteamLinx B and Ethernet Cable
• Power Supply and Cable
• Instructions
Indicates a potentially hazardous
situation, which, if not avoided, may result in
death or serious injury.
Indicates a potentially hazardous
situation, which, if not avoided, may result in
minor or moderate injury or product damage.
is used to address practices not
related to physical injury.
Locate the SteamLinx A
1.1
(with the integral cable).
A
– –––––––––––
GENERATOR
SteamLinx A
ELECTRICAL SHOCK HAZARD.
Circuit Board
Mounting Tab
Indicator Light