Interfit S1 Instruction Manual page 2

Interfit S1 Battery Powered TTL/HSS Flash Unit
What's cool about the Interfit S1?
The Honey Badger is the perfect tool for any shoot, and at 320Ws and only 3lbs, it's a real force
to be reckoned with. The aggressive flash recycle time ensures you are ready to strike at the right
moment, while the expanded 7-stop power range gives you the versatility and precision you
need to attack any shoot. Remote control of the Honey Badger streamlines setup and operation,
allowing you to remain focused on your work. The ultra bright modeling lamp is softened with the
frosted glass outer dome and will conveniently light your photos and videos. The included 24-inch
Pop-Up softbox fits perfectly around the versatile modifier ring on the flash unit so you are ready
to shoot right out of the box.
With all of these features in addition to a Bowens® modifier mount, sync port for additional
remotes, a wide range of channels and groups and a lightweight compact form, the Honey Badger
is ready to go to any of your shoots with power and control.
How do I keep my Interfit S1 and myself safe?
1. Always keep this product from rain or dampness to avoid fire or electric shock.
2.This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it
may result in electric shock and/or product failure. Do not disassemble. Tampering with your flash
unit will void the warranty. Should repairs become necessary, this product must be sent to an
Interfit repair facility.
3. Stop using this product if it breaks open due to extrusion, falling or strong hit. Continued use
may result in electric shock and/or further product damage.
4. Do not fire the flash directly into the eyes (especially those of babies) within short distances.
Otherwise visual impairment may occur.
5. Do not use this flash unit in the presence of flammable gases, chemicals and/or other flammable
materials. In certain circumstances, these materials may be sensitive to the strong light emitting
from this flash unit and fire or electromagnetic interference may result.
6. Do not leave or store this flash unit if the ambient temperature reads over 120°F/50°C (e.g. in
automobile). Prolonged exposure to excessive heat may damage electrical components.
How does Interfit Protect my S1?
Your Interfit S1 is protected by a one-year manufacturer warranty against manufacturer defects.
Warranty does not cover consumables, such as the flash tube, battery or glass dome.
You can reach Interfit Photographic Ltd. for customer service at:
Interfit Photographic USA
1 (866) 947-9796
support@interfitphotographic.com
Interfit Photographic UK
+44 (0) 121-522-4800
sales@interfitphotographic.com