Analysis (With Computer); Copying Files - Hioki PQ3100 Instruction Manual

11

Analysis (with Computer)

This section describes how to load data recorded with the instrument onto a computer and analyze
the data using the supplied application software, PQ One.
Refer to Application Software Instruction Manual (CD).
File contents
Screen copy data
Setting data
Trend record data
Flicker/trend record data
(Available after the firmware
update)
Event list
Event data
Event trend data
: Supported, —: Not supported
The data measured by the instrument is written in binary format and cannot be directly read using spreadsheet
software such as Microsoft Excel
and output in CSV format, the data can be read using spreadsheet software (available after the firmware
update).

11.1 Copying Files

The following methods are available to copy data saved to a computer.
Use an SD memory card reader
The SD memory card is recognized as a removable disk by
connecting the instrument to a computer with a USB cable
Copy the data from the internal memory to the SD memory
card and copy the data from the SD memory card
: Supported, —: Not supported
Included application software
Recording data
Extension Format
BMP Binary
SET Binary
ITV Binary
FLC Binary
EVL Binary
EVT Binary
WDU Binary
®
. When the measured data is read using the appropriate application software
Method
Supported software
Application Other than application
software software
— Graphics software






SD
Internal
memory
memory
card
— p. 130

— p. 131

— p. 125

11
—
Reference
129