Error Codes; Specifications - Kenwood K1016WM17 Installation And Instruction Manual

error codes
Display
LED
E10
Reason
Inlet water problem
while washing
Solutions
• Open the water tap, to check if the inlet hose is
squashed or kinked, check if the filter in the inlet valve
is blocked or not; check if the water pressure is too
low.
E12
Water overflow
• Reset the machine by switching off the power, then on
again.
E21
Drain water problem
while washing
. Check if the drain pump is blocked.
E30 Door lock problem
• Check if the door of the washing machine is closed.
• Check if the clothes are pinned by the door.
Others • Please call up the service line if there is any other problem.
specifications
model
a4N
K1016WM17
rated voltage 220-240 V- 50Hz
aximum current
ted power input
10A
1950 W
imension (H x W x D) 850 mm x 595 mm x 565 mm
t
et weight
72 kg
rated capacity
- - 10 kg
maximum spin speed 1600 rpm
inlet water pressure
Minimum 0.05 MPa; Maximum 1.0 MPa
Features and specifications are subject to change without prior notice.
26