Download Print this page
RTI KX2 Quick Reference Manual

RTI KX2 Quick Reference Manual

In-wall controller

Advertisement

Quick Links

KX2
In-Wall Controller
Description
The KX2 in-wall controller has a clean, sleek design with twelve programmable
hard buttons and a 2.8" color touchscreen. The hard buttons and graphic
interface are fully programmable using RTI's Integration Designer® software for
full control of electronics throughout the building. A built-in infrared output port
allows direct control or get two-way control when used with an RTI XP series
control processor. In addition, the unit's integrated 10/100Base-T Ethernet port
with Power-over-Ethernet (POE) provides the flexibility to accommodate any
installation.
Product Contents
Contents within the box include the following items:
One (1) KX2 In-Wall Controller
One (1) Bezel (White)
Two (2) Mounting Wings
Twelve (12) Replaceable Keycaps
One (1) MAC Address Card
One (1) Drywall Cutout Template
One (1) Quick Reference Guide
Safety Suggestions
Read and Follow Instructions. Read all safety and operating instructions before
operating the unit.
Retain Instructions. Keep the safety and operating instructions for future
reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating
instructions.
Heat. Keep the unit away from heat sources such as radiators, heat registers,
stoves, etc., including amplifiers that produce heat.
Power Sources. Connect the unit only to a power supply of the type described in
the operating instructions, or as marked on the unit.
Water and Moisture. Do not use the unit near water—for example, near a sink,
in a wet basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be spilled into
the enclosure through openings.
Servicing. Do not attempt any service beyond that described in the operating
instructions. Refer all other service needs to qualified service personnel.
Damage Requiring Service. The unit should be serviced by qualified service
personnel when:
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change in
performance.
The unit has been dropped or the enclosure has been damaged.
Limited Warranty
RTI warrants its products for a period of one (1) year (90 days only for included
battery packs); or for a period of time compliant with local laws when applicable
from the date of purchase from RTI or an authorized RTI distributor.
This warranty may be enforced by the original purchaser and subsequent owners
during the warranty period, so long as the original dated sales receipt or other
proof of warranty coverage is presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and
workmanship in this product. The following are not covered by the warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Remote Technologies
Incorporated.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or
experience of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or
removed.
Copyright © 2014 • Remote Technologies Incorporated • All rights reserved.
It's Under Control
Contacting RTI
For news about the latest updates, new product information, and new
accessories, please visit our web site at: www.rticorp.com
For general information, you can contact RTI at:
Remote Technologies Incorporated
5775 12th Avenue East, Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
Fax (952) 253-3131
Service & Support
If you are encountering any problems or have a question about your RTI
product, please contact RTI Technical Support for assistance (see the Contacting
RTI section of this guide for contact details).
RTI provides technical support by telephone or e-mail. For the highest quality
service, please have the following information ready, or provide it in your fax or
e-mail.
Your Name
Company Name
Telephone Number
E-mail Address
Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your
system, a description of the problem, and any troubleshooting you have already
tried.
If you are having a problem with software, please note what version you have
installed, the operating system on your PC, a description of the problem, and
any troubleshooting you have already tried. If you are calling about a software
or programming question or problem, please be at your computer when you
place your call. This will considerably speed up the troubleshooting process.
*Please do not return products to RTI without return authorization.*
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI website
at: www.rticorp.com/declaration
®
In-Wall Controller
Quick Reference Guide
Features
• Fully customizable 2.8" touchscreen display and twelve
assignable/programmable buttons.
• QVGA resolution (240w x 320h) TFT LCD to display custom
buttons, text and graphics.
• Integrated 10/100Base-T Ethernet port with Power-over-
Ethernet.
• IR output drives up to 1000 feet of wire.
• Proximity sensor automatically wakes the unit up when
approached by the user.
• Ambient light sensor automatically adjusts the brightness.
• Integrated mounting wings for easy installation in retrofit
installs.
• Fits in a 4"x4" square electrical junction box (See important
information reverse side of this page).
• Ships with stylish, low-profile white bezel (Other bezel colors
available also).
• Optional modules/processors for voltage sensing, relays and
advanced two-way control.
• USB and Ethernet programming.
N27917
Laser Shark
®
Compatible
KX2
The KX2 hard buttons (12) may
be custom laser etched using the
RTI Laser Shark service.
70-210114-16 V1.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the KX2 and is the answer not in the manual?

Questions and answers

Summary of Contents for RTI KX2

  • Page 1 If this equipment does cause harmful interference to radio or television • Ambient light sensor automatically adjusts the brightness. RTI warrants its products for a period of one (1) year (90 days only for included reception, which can be determined by turning the equipment off and on, the •...
  • Page 2 CONDuIT/bACK bOX 1.2” (30.5mm) uSb PORT USB cable (USB A to Mini B), or via the Ethernet network (LAN). If the KX2 is The KX2 uses a standard 4”x 4” electrical junction box. These should be 4.6” (117mm) The KX2 USB port (located on the front of the unit beneath the bezel) is used to...