GE Profile PP962EH Dimensions And Installation Information

PP962EH
GE Profile Series 36" Built-In Cooktop
™
Dimensions and Installation Information (in inches)
Note: Check local codes for required breaker size
†
Important: Requires a 5" free area between the
bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
adjacent overhead cabinets. Units are furnished with a
48" flexible armored cable.
Note: 36" Ribbon cooktops are approved for use over
GE 30" Single Wall Ovens and Warming Drawers only.
Refer to cooktop and wall oven/warming drawer
installation instructions packed with product for
current dimensional data. If installed with a GE
Profile ™ Telescopic Downdraft System, consult both the
cooktop and downdraft installation instructions packed
with product before installing. Cooktop gas/electric
supply may need to be re-routed to install downdraft.
The countertop must be at least 26" deep with a
flat surface area of 23-1/2" or more,front to back. In
addition, other clearances to the front edge of the
countertop must be considered, especially on raised
bullnose countertops. Consult cabinet and countertop
manufacturer's specs for flush mount installation prior
to install.
Installation Information: Before installing, consult
installation instructions packed with product for current
dimensional data.
36
Cooktop
33-7/8
2-1/2**
Required
* Depth of unit at conduit connection location (rear)
is 6-1/4" on models PP975/945 and 4-3/16" on
models CP350/650, PP944/962/932/912, and
JP656/356/336. Depth of unit at baffle (front) is
4-5/8" on models PHP960/900.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
KW Rating
240V 9.4
208V
7.1
Breaker Size
240V 40 Amps
†
Note: Check local codes for
†
208V
40 Amps
†
required breaker size
For answers to your Monogram
®
questions, visit our website at geappliances.com
or call GE Answer Center ® service, 800.626.2000.
20-7/8
3-1/4*
19-1/8
1-1/2" MIN.
(30" cooktop)
2" MIN. (Induction
and 36" cooktops)
clearance to side
wall from cut-out
Electrical junction
box 16" MIN.
below countertop
PHP960DM
PP975BM
PP962EH/TM/BM
JP656DD
or GE appliance
®
13" MAX.
depth
30" MIN. to
1-1/2" MIN.
unprotected
15" MIN.
(30" cooktop)
cabinet
to cabinet
2" MIN. (Induction and
36" cooktops) clearance
1-3/4" to
to side wall from cut-out
rear wall
Cut should not interfere
with cabinet structure
at front
Specification Created 2/14 220560