Printhead - Honeywell PM42 Service & Repair Manual

TITLE
PM42 Service Repair Manual

Printhead

OPERATION:
The handstrap is attached to the bottom housing. It can be removed and installed without opening the unit.
Tools Required
Description
Isopropyl alcohol solution
Parts Required
Item Part Number
1 50126706-001FRE
2 50126707-001FRE
3 50126708-001FRE
Printhead Assembly Replacement
1. Turn the printhead lift lever counterclockwise to raise the printhead
2. Detach the magnetic pressure arm from the printhead bracket and disconnect the two cables from the printhead
as you remove it from the printer.
3. Connect the two printhead cables to the new printhead
4. As you insert the new printhead bracket into the printer, make sure the metal arms on the printhead go around
the magnetic pressure arm. Attach the magnetic pressure arm to the printhead.
Cleaning Printhead
Recommended that the installed printhead be cleaned. To clean the printhead, the following are needed:
• Silicone cleaning fluid
• Lint-free cleaning cloth
• Thermal printhead cleaning swab, wipe, or pen
Model
L3-GLBL-RPR-3872
PM42
(Rev A)
Description
FRE, ASSY, PRINTHEAD, 203DPI, PM42
FRE, ASSY, PRINTHEAD, 300DPI, PM42
FRE, ASSY, PRINTHEAD, 406DPI, PM42
Printhead Cables
DOCUMENT NO.
Page 14 of 48
Magnetic Pressure Arm
Thermal Printhead
PAGE
Qty
1
1
1
1
L3-GLBL-RPR-3872 (Rev A)