Underexposure And Coupling Range Warning Led Lamp - Canon AE-1 Instructions Manual

ing: Increase the shutter speed until the meter When the shutter speed i s
set
at "8"
needle indicates f/22 and then decrease the (Bulb) and the shutter bunon is pressed
shuner speed by one gradation so that the ex- halfway, this warning lamp will also flash on
posure will be correct.
and off.
Underexposure and
Coupling Range Warning LED Lamp
This lamp blinks on and off a s
a
warning
of incorrect exposure. If you reduce the
shutter speed by turning the shutter speed dial
so the underexposure warning lamp will stop
blinking, the correct exposure will be
obtained.
Under dim light with a slow speed lens,
there i s a case when the meter needle will
point at the aperture scale inside the view-
finder although it will exceed the maximum
aperture of the lens. In this case, turn the
I
shutter speed dial t o a slower setting so that
the underexposure warning lamp stops blink-
ing.
For example, when you use an fl2.8 lens
and the meter needle exceeds the aperture
scale of f12.8 inside the viewfinderrreduce the
shutter speed until the lamp stops flashing.