San Jamar C2410C Installation Instructions

C2410C EZ-FIT
1. CUT HOLE IN COUNTER SURFACE
HOLE SAW RECOMMENDED
2. REMOVE TRIM RING TURNING
COUNTER CLOCKWISE
3. SECURE CUP DISPENSER TO COUNTER
WITH SUPPLIED SCREWS
4. SELECT PROPER SIZE GASKET FOR CUP
(SEE TABLE ON BACK)
REPLACEMENT PARTS & ACCESSORIES
X24MT Black Mounting Ring (new low profile)
X24TR Black Trim Ring (new low profile)
XC24KIT Replacement Trim Rings (old & new)
CUP DISPENSER INSTALLATION INSTRUCTIONS
®
(see reverse side for replacement gaskets)
C2415
C2413BK
100458BK
5. INSTALL GASKET OVER POSTS IN
UNDERSIDE OF RING
6. REPLACE COVER RING WITH GASKET BY TURNING
CLOCKWISE OVER MOUNTING RING UNTIL SECURE
7. LOAD CUPS THROUGH GASKET
Spring C2412SV
End Cap C24XC
Cup Pusher
Wire Cage for Surface Mount
Chrome Finish Trim Ring