Ctscope; Syptpro - Emerson Unidrive M700 User Manual

8.3

CTScope

CTScope is a software application which provides commonly used oscilloscope
features to monitor drive parameters.
Features include:
•
•
•
•
•
•
•
•
•
CTScope was originally developed for use with Unidrive SP, some limitations exist
when used with Unidrive M, these limitations include:
•
•
•
See knowledgebase doc UNIM004 for more information)
8.3.1 Configuration
All the appropriate configuration settings are displayed on the main screen. (CT-TCP/IP
must be selected in the Communication Settings).
8.4

SyPTPro

SyPTPro is a complete integrated development suite for distributed drive applications.
SyPTPro allows user programs to be developed for multiple nodes in DPL, ladder and
function block programming languages. DPL (Drive Programming Language) is a high
level language as easy to use as BASIC but optimised for drive applications. SyPTPro
also allows user programs to be downloaded to nodes and the runtime operation of the
programs to be monitored.
To use SyPTPro over Ethernet requires a version that provides Ethernet support,
SyPTPro V02.01.00 or later includes support for TCP/IP.
SyPTPro can only be used to program a SI-Applications Plus option module and not an
NOTE
onboard drive program or a MCi200/MCi210 Machine Controller module.
For more information on using SyPTPro please refer to the online help supplied.
SyPTPro is only supported on the onboard Ethernet.
NOTE
180
Four channels
Triggers
• Start/Stop at absolute time
• Start/Stop on value (rising/falling edge)
Channels can capture parameter values from different nodes
Scaling & offset per channel
Cursors to aid measurement
Zoom facility
Scroll/Panning facility
Save/load scope configurations with or without data
Print facility
Unidrive M parameter database not supported
No access to option module parameters (except SI-Applications Plus)
Only parameters 99 or less can be directly scoped (Parameters with a number
of greater than 99 can be mapped to menu 0 and the menu 0 parameter then
scoped.
SI-Ethernet User Guide
Issue: 1