Pyronix KX15DT User Manual

2
EN50131-1
PD6662:2004
Security Grade 2
Environmental Class 2
1: Disassembling the KX
KX15DT
®
TS50131-2-4
3
EN50131-1
15m Dual Technology
PD6662:2004
Security Grade 3
Digital Detector
Environmental Class 2
EN50131-2-4:2008
TS50131-2-4
2 EN50131-1
EN50131-1
PD6662:2010
PD6662:2004
Security Grade (SG) 2
Security Grade 2
Environmental Class 2
Environmental Class (EC) II
RINS549-13
Installation of The KX15DD D The KX15DD Printed Circuit Board
®
of The KX15DD The KX15DD Printed Circuit Board ®
D
®
X15DD Casing ® Wall Bracket Fitting
4: Bracket Connections 5: Installation Hints
EOL Resistance
Wall Bracket Fitting Headers
C2 C3
EOL Resistance ALARM CONTROL PANEL
Headers
CABLE ENTRY C3
a) Ceiling Do not partially or completely obscure the detector's
KNOCKOUT Pyro Sensor
+ – ALARM TAMPER LED
6K8 field of view with large objects such as furniture. + - 5K6
5K6 4K7
Bracket 4K7
Pyro Sensor 2K2
2k2 1K
1K
Fitting
Avoiding False Alarms
Alarm LED
Alarm LED When the detector is first powered up, it will run
through a self-test routine, indicated by the flashing
LOW AUTO AUTO HI
LEDs. Once this has distinguished the detector is
OFF ON (Default)
ready to use.
Auto Sensitivity
OFF ON (Default)
+ -
Auto Sensitivity
ll Mounting Ceiling Bracket Fitting ALM
1. Avoid placing the detector in direct sunlight.
Ceiling Bracket Fitting C5
C5
2. Do not let pets and other animals wander freely
LOW AUTO
whilst the alarm system is armed.
+ – ALARM TAMPER LED
6K8
5K6
LOW AUTO AUTO HI 4K7
2k2
1K
3. Do not mount the detector near heaters or
radiators. TAMPER
b) Wall Bracket
This is the default
ALARM
Fitting setting
4. Do not mount the detector near open windows or
This is the default
LOW AUTO AUTO HI
setting
The Wiring Connections For The KX15DD (Examples using 4k7 for alarm, 4k7 for tamper)
iring Connections For The KX15DD (Examples using 4k7 for alarm, 4k7 for tamper)
®
ormally Closed Wiring
10: Choose the Connection Type: Single End of Line Wiring (SEOL)
ing Control Panel Single End of Line Wiring (SEOL) E2 Control Panel Double End of Line Wiring (DEOL)
a) Normally Closed E2 b) Single End of Line Wiring E3
Control Panel
+AUX- Z1 T T 5K6 6K8 +AUX- Z1 T T
5K6
4K7
5K6 6K8 +AUX- Z1 T T 4K7 5K6
2K2
4K7 5K6 2K2 4K7
1K
LARM CONTROL PANEL ALARM CONTROL PANEL 4K7 1K ALARM CONTROL PANEL ALARM CONTROL PANEL ALARM CONTROL PANEL
ALARM CONTROL PANEL ALARM CONTROL PANEL
2K2 2K2
2K2
The
1K 1K
1K
connection
+ - + - + - + - + -
+ – ALARM TAMPER LED + - + – ALARM TAMPER LED
8 5K6 shows the 6K8 5K6
6 5K6
4K7 4K7
7 4K7
2K2 2K2
6 2 1K 6K8 + – ALARM TAMPER LED example value 5K6 2K2
1K
K 5K6 1K
7 4K7
2 4K7 2K2
4k7 for tamper
2K2
1K
1K
® (EOL). ®
KX15DD KX15DD
®
KX15DD Link
Zone Doubling Example (Matrix 424,832 or 832+)
+ -
ing Example (Matrix 424,832 or 832+)
Control Panel
6K8
E5
5K6
Control Panel 5K6
6K8 4K7 4K7
+ - + - + -
- + - +AUX- Z1 T T + - + -
K8 5K6 ALM ALM TAMPER ALM ALM ALM TAMPER
ALM ALM TAMPER 5K6 2K2 ALM
ALM 2K2 ALM TAMPER
5K6
K6 4K7
4K7 1K
+AUX- Z1 T T 1K
4K7
K7
2K2 2K2
Link 5K6
2K2
K2 1K
1K
4K7
1K 1K
2K2
1K
+AUX-
+AUX-
+AUX-
+ – ALARM TAMPER LED
+ – ALARM TAMPER LED 5K6
6K8 5K6 6K8
5K6 4K7 5K6 4K7
4K7 4K7 2K2
TAMPER 2K2 TAMPER TAMPER
ED TAMPER TAMPER + – ALARM TAMPER LED 5K6 TAMPER
5K6 2K2 6K8 KX15DD ® 2K2 1K
1K
1K 5K6 4K7 1K
4K7
4K7
2K2 2K2
® 2K2 KX 1K KX
1K KX15DD KX
ARM ALARM 1K KX ALARM ALARM ALARM
ALARM ALARM
12: The 15m Volumetric Lens 13: Dimensions and Weight
85°
60 zones
7 planes
RLNS074
ALARM CONTROL PANEL
ALARM CONTROL PANEL ALARM CONTROL PANEL
+ -
+ - + -
Link
Link Link
2K2 2K2
+ - 2K2
+ - + -
+ -
Hard Wired Hard Wired
Hard Wired
Resistor
Resistor Resistor
+ -
+ -
+ - ALM TAMPER ALM + - ALM TAMPER
ALM TAMPER ALM ALM TAMPER
ALM ALM TAMPER ALM ALM TAMPER
* In an EN50131-1 (and INCERT) system the
maximum detection is 13m.
a) Printed Circuit Board
b) Lens Illuminator
e) PCB
Screw
f ) Back
Tamper
d) Lens Holder
®
c) Lens E EOL Resistor Headers
E EOL Resistor Headers
6: Sensitivity Settings
SENSITIVITY SETTINGS:
®
The KX15DD has two sets of header pins on the PCB, one on
ALARM CONTROL PANEL
either side of the connector blocks. These headers are used to
SENSITIVITY SETTINGS:
®
Auto, High or Low. The KX15DD has two sets of header pins on the PCB, one on
select the End Of Line resistance for EOL wiring applications.
a) Auto Sensitivity (Default)
6K8 + – ALARM TAMPER LED either side of the connector blocks. These headers are used to
5K6 If EOL wiring is not used, leave the headers OFF.
5K6 4K7
4K7 Auto, High or Low. 2K2
select the End Of Line resistance for EOL wiring applications.
2k2 1K
1K See the diagams below
If EOL wiring is not used, leave the headers OFF. + -
The set to the left of the + terminal selects the value of the
See the diagams below resistance across the ALARM relay. The set to the right of the
The set to the left of the + terminal selects the value of the
The KX15DD sensitivity is selected by TAMPER terminals selects the value of the End Of Line resistor.
resistance across the ALARM relay. The set to the right of the
the two headers located at the bottom
The KX15DD sensitivity is selected by TAMPER terminals selects the value of the End Of Line resistor.
of the PCB If the resistance value you require
the two headers located at the bottom
is not selectable, leave the
of the PCB If the resistance value you require
The sensitivity can be either AUTO, headers off and wire a resistor
is not selectable, leave the This symbol illustrates
LOW AUTO AUTO HI HIGH or LOW. of the required value between the
The sensitivity can be either AUTO, headers off and wire a resistor
appropriate terminals as shown. where the resistors are
HIGH or LOW.
To select either of these sensivities of the required value between the
connected internally
please see the diagrams below. appropriate terminals as shown.
To select either of these sensivities
please see the diagrams below.
High Sensitivity
+ -
High Sensitivity Low Sensitivity
ALM TAMPER ALM ALM TAMPER
6K8 + – ALARM TAMPER LED 5K6
6K8 + – ALARM TAMPER LED 5K6
5K6 4K7 5K6 4K7
AUTO HI 4K7 2K2 LOW AUTO AUTO HI 4K7
2k2 1K 2K2
1K 2k2 1K
1K
5K6 6K8 + – ALARM TAMPER LED 5K6
4K7 5K6
2K2 4K7
1K LOW AUTO AUTO HI 4K7 2K2 LOW AUTO AUTO HI
2k2 1K
1K
TAMPER
KX KX
LOW AUTO AUTO HI
ALARM LOW AUTO AUTO HI
LOW AUTO AUTO HI
®
Double End of Line Wiring (DEOL)
E3 Control Panel Remote LED Enable
The KX15DD has a terminal marked 'LED' which can be used
to enable the LED in walk test only on a alarm control panel.
c) Double End of Line Wiring ®
Control Panel
The KX15DD has a terminal marked 'LED' which can be used
6K8
5K6 5K6
+AUX- Z1 T T to enable the LED in walk test only on a alarm control panel.
This is used when the LED is disabled via the LED ON/OFF link.
5K6
4K7 4K7
6K8 4K7 5K6
2K2 +AUX- Z1 T T 2K2
This is used when the LED is disabled via the LED ON/OFF link.
5K6 2K2 To enable this feature, the LED terminal needs to be connected
4K7
1K 1K
4K7 1K The ALARM CONTROL PANEL ALARM CONTROL PANEL to an Output at the alarm control panel. When the system is
ALARM CONTROL PANEL
2K2
2K2 To enable this feature, the LED terminal needs to be connected
is in walk test mode the Output should be at 0V.
connection 1K
1K to an Output at the alarm control panel. When the system is
is in walk test mode the Output should be at 0V.
The Output would be usually programmed as "Remote LED
shows the
+ - + - enable".
+ - + – ALARM TAMPER LED + -
6K8 5K6
example The Output would be usually programmed as "Remote LED
5K6
4K7
4K7
enable". 2K2
+ – ALARM TAMPER LED
6K8 2K2 5K6 1K
values of 4k7
5K6 1K
4K7
+ – ALARM
4K7 2K2
2K2 for Alarm and
1K
1K
+ – ALARM TAMPER LED
4K7 for tamper ®
KX15DD
(EOL). ®
KX15DD
Two DEOL Detectors To One Input
2K2
+ -
Two DEOL Detectors To One Input
E5
Hard Wired
Control Panel
Resistor 5K6
Control Panel
4K7
6K8
+ - 5K6 + - +AUX- Z1 T T
+ - + -
ALM TAMPER ALM ALM TAMPER ALM 2K2 ALM TAMPER
ALM TAMPER 6K8 ALM 5K6 ALM TAMPER
ALM ALM TAMPER ALM ALM
4K7
5K6 +AUX- Z1 T T 4K7 1K
2K2
6K8 Link
4K7 2K2
5K6 1K
2K2 1K
Link
4K7
1K
2K2
1K
+AUX-
+AUX-
+AUX-
+ – ALARM TAMPER LED
6K8 5K6
5K6 4K7
4K7 2K2
+ – TAMPER ALARM TAMPER LED TAMPER + – ALARM TAMPER LED
TAMPER 6K8 5K6 2K2 TAMPER 6K8 TAMPER 5K6
1K KX15DD ®
5K6
5K6 4K7 1K 4K7
4K7 4K7 2K2
2K2
2K2 2K2
KX 1K KX ® 1K
KX KX15DD 1K KX KX
1K ALARM KX ALARM ALARM
ALARM
14: Technical Specification
Model: KX15DT
Colour: White
LED Colours: Orange (Microwave), Blue (Alarm),
Green (PIR)
ALARM CONTROL PANEL
ALARM CONTROL PANEL ALARM CONTROL PANEL
Casing: 3mm ABS, 0.4mm HDPE in Lens Area
Detection Method: Low noise dual element
+ -
+ - + -
pyroelectric sensor and Microwave Doppler Sensor
PIR Sensitivity: Auto or High
117 x 69 x 50mm Temperature Comp: Digital
Link
Link Link
+ - + - + -
+ - + -
Detection Range: 15m (13m according to EN
50131-2-4 and INCERT)
125g (4.4 oz)
+ - + -
+ - + -
ALM + - Detection Speed: 0.3 - 3.0m/s ALM TAMPER ALM
ALM ALM TAMPER ALM
ALM ALM TAMPER
without bracket
Operating Voltage: 9-16V DC 13.8V DC typical
2: The Printed Circuit Board
b) Mains Frequency
50Hz
(Default)
60Hz
c) Sensitivity Auto/High
See Section 6
d) AND/OR
See section 7
e) ALARM LED
LED Disable
f ) Tamper and Alarm
f ) Nut
LED Enable Resistor Headers
g) Casing Screw
(Default)
ALARM CONTROL PANEL
b) High Sensitivity
+ -
This symbol illustrates
where the resistors are
connected internally
Low Sensitivity
+ -
ALM ALM TAMPER
6K8 + – ALARM TAMPER LED 5K6
5K6 4K7
4K7
LOW AUTO AUTO HI 2K2
2k2 1K
1K
6K8 + – ALARM TAMPER LED 5K6
5K6
4K7
4K7 2K2
2k2 1K
1K
TAMPER
KX
LOW AUTO ALARM AUTO HI
LOW AUTO AUTO HI
Remote LED Enable
®
d) Two Double End of Line Detectors to One Input
ALARM CONTROL PANEL
The connection shows
+ -
the example values
4k7 for alarm, 4k7 for
TAMPER LED
tamper (EOL).
Control Panel
Output
Control Panel
(0v in Walk Test)
Output
Link
(0v in Walk Test)
+ -
+ -
6K8
5K6
4K7 + - + -
ALM ALM TAMPER ALM ALM TAMPER
5K6
2K2 TAMPER
1K 4K7
5K6
2K2
4K7
1K
2K2
1K
+AUX-
+ – ALARM TAMPER LED
6K8 5K6
5K6 4K7
4K7
2K2
TAMPER TAMPER
2K2
1K
1K
KX KX
ALARM KX ALARM
RINS1038-3
RINS1038-3
Current Consumption: 24mA @ 12V (Min), 30mA @
12V (Max)
85°
60 zones
7 planes
Relay Output: 50mA 60 VDC, 42 VAC (RMS)
RLNS074
This product operates in a European non-harmonised
!
Contact Resistance: <10ohms frequency band
Mounting Height: 1.8m - 2.4m Frequencies Countries
9.9Ghz
Tamper Switch: 12V 50mA
Storage Temp: -40°C to 80°C
Certified operating temperature: -10°C to 40°C
Nominal working temperature: -30°C to 70°C
10.525Ghz
+ -
Accessories: Wall and Ceiling brackets
Emissions: EN55022 Class B
+ - ALM TAMPER
ALM TAMPER
ALM ALM TAMPER
10.587Ghz
Immunity: EN50130-4
3: Cable Entry + Mounting
a) Terminals b) Cable Entry
a) Mounting Screw
Knockouts
h) Microwave
Potentiometer
g) Pyro Sensor
DO NOT TOUCH
c) Case Lid Screw
Fitting
7: AND/OR Mode 8: Microwave Potentiometer
ALARM CONTROL PANEL
+ -
Note: turning pot fully anti-clockwise turns off
microwave
+ -
+ -
AND
Conventional Dual Tech (Both technologies need to
be triggered simultaneously to generate an alarm)
+ -
ALM ALM TAMPER
ALARM
OR
TAMPER
KX
ALARM
If either single technology detects prolonged
intruder activity an alarm will be generated
e) Zone Doubling Example (For Matrix 424, 832, 832+)
ALARM CONTROL PANEL
The connection shows the
+ -
example values 4k7 for alarm,
4k7 for tamper (EOL). And 2K2
for the zone doubling EOL.
Link
2K2
+ - + -
Hard Wired
Resistor
+ - + -
ALM ALM TAMPER ALM ALM TAMPER
TAMPER TAMPER
KX
ALARM ALARM
15: Compliance and Warranty
Hereby, Pyronix Ltd, declares that this product is in
compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC, and
EN50131-2-4:2008 at Security grade (SG) 2,
Environmental class (EC) II. This product is approved for
use in the Residential, Commercial and Light Industrial
Environment. It is suitable to be installed with
UK systems to PD6662:2010,
AT, BE, CH, CY, CZ,
and EXPORT systems installed to EN501311:2006+A1:2009
DK, FI, FR, GR, HU, IE,
The declaration of conformity may be consulted at
IS, IT, LT, MT, NL, PL, www.pyronix.com/product-compliance
SI,T R
WARRANTY: This product is sold subject to our standard
BE, CH, CY, DK, HU,
warranty conditions and is warranted against defects in
IE, IS, IT, MT, NL, NO, workmanship for a period of five years. In the interest
of continuing improvements of quality, customer care
SE, SI
and design, Pyronix ltd reserves the right to amend
GB specifications without giving prior notice.
Visit www.pyronix.com/warranty for more information.
®
+ -
ALM ALM TAMPER
Knockout
TAMPER
KX
ALARM
ALARM CONTROL PANEL
+ -
9: EOL Resistor Headers
Link
ALARM CONTROL PANEL ALARM CONTROL PANEL 2K2
+ -
The KX15DT has 2 set of header pins at the top of
Hard Wired
the printed circuit board. These headers are used Resistor
+ - + -
to select the End of Line resistance for EOL wiring
+ -
ALM ALM TAMPER ALM ALM TAMPER
applications.
If EOL wiring is not used, leave the headers OFF.
+ - + -
TAMPER ALM ALM TAMPER TAMPER ALM
KX
ALARM
Minimum
Range (0m)
TAMPER TAMPER
Maximum
KX
ALARM ALARM
Range (15m)
11: Powering Up
ALARM CONTROL PANEL
When the detector is first powered up, it will run
+ -
through a self-test routine, indicated by the flashing
LEDs. Once this has distinguished the detector is
ready to use.
 
NOT READY READY
Link
+ -
+ -
ALM ALM TAMPER
TAMPER
KX KX
ALARM
16: Contact Information
Secure Holdings, Pyronix Ltd,
Braithwell Way, Hellaby,
Rotherham, South Yorkshire
S66 8QY
Customer Support:
+44(0)845 6434 999 (local rate)
or +44(0)1709 535225
Hours: Mon to Fri, 8:00am till 6:30pm
Email: customer.support@pyronix.com
Website: www.pyronix.com
For electrical products sold within
the European Community. At the
end of the electrical products useful
life, it should not be disposed of with
household waste. Please recycle
where facilities exist. Check with your
Local Authority or retailer for recycling
advice in your country.
+ -
ALM
TAMPER
ALARM
ALM TAMPER
KX
KX
+ -
+ -
ALM
TAMPER
ALARM