ASSEMBLY
Attention! The battery cannot be charged immediately
after use, it should cool off for a period of time. The
LED lights switching from green to red means it can be
charged.
Charging the battery
3
NOTE: This battery pack has been shipped in a low
charge condition. It should be fully charged before
first use. Make sure the main voltage is the same as
rating label which located on the charger.
WARNING!
The charger and battery pack are specifically
designed to work together so do not attempt to
use any other devices. Never insert or allow metallic
objects into your charger or battery pack connections
because an electrical failure and hazard will occur.
The battery needs to be charged before first use and
whenever it fails to produce sufficient power on jobs
that were easily done before.
AFTER SALES SUPPORT 0345 605 2067
19
Need help?
Do you have a question about the HT04 and is the answer not in the manual?
Questions and answers