Monitoring The The Hdmi-Ip-E Via Vlc And Other Software - Apantac HDMI-IP-E User Manual

Hdmi to h.264 encoder/transmitter. hdmi to h.264 decoder/receiver

Hide thumbs Also See for HDMI-IP-E:

Table of Contents

5. Connect the CATx cables between all the HDMI-IP-R's and the switch

6. Make sure the

transmitter and receivers

7. Connect the power to both HDMI-IP -E's and all the HDMI-IP-R's

8. Turn on the the power for the HDMI Displays

6.4 Monitoring the the HDMI-IP-E via VLC and other

Software

Instead of using a HDMI-IP-R as the decoder of the the H.264 stream, software such as

VLC can be used to decode the source and view it. Apantac does not gurantee the

performances the above mentioned software. Please see Appendix A for examples on

how to use VLC to the best of our knowledge.

INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921

HDMI-IP-E and HDMI-IP-R

DIP Switch

is set the same ID between the corresponding

APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224

Table of Contents

Need help?