Advertisement
Quick Links
QUICK SETUP GUIDE
Wi-Fi Smart Plug
NS-SP1X7 / NS-SP1X7-C
SYSTEM REQUIREMENTS
• Home Wi-Fi network
• Connect app (free download at connect.bestbuy.com/setup)
The Connect app tracks status information for all your Insignia smart home
devices in one place. Signing into a Best Buy account is required for remote
access and to keep your data secure.
• iOS 10 or later
• Android 6.0.1 Marshmallow or later
ELECTRICAL RATINGS
• Electrical rating: 15A, 120Vac, 60Hz
• Resistive: 1800W
• Tungsten: 960W
Before using your new product, please read these instructions to prevent any damage.
SETTING UP & USING YOUR SMART PLUG
1 Connect your mobile device to a Wi-Fi network.
2 Type connect.bestbuy.com/setup in the search bar of your device's
browser and follow the on-screen instructions to download the app.
3 Open the Connect app, then log in or sign up for a Best Buy account.
Note: If you plan to access your Smart Plug on multiple devices, you must
sign into the same Best Buy account on each device.
4 Plug the Smart Plug into an outlet. A blinking green LED means it's
ready for setup.
Notes:
• If LED is not blinking, do a factory reset. See Troubleshooting.
• Do not plug your Smart Plug into a surge protector or a wall outlet
controlled with a switch. The plug must always have power.
5 To connect to your Smart Plug:
• Android: Tap Set up new device and follow the on-screen instructions.
• iOS: Tap Setup new device, then press your device's home button and
open the Settings app. Tap Wi-Fi, and then tap the network named
Insignia - XXXXXXX. Your iPhone automatically reopens the Connect app
to continue setup. Follow the on-screen instructions.
6 Plug a fan, coffee maker, decorative lights, and more into the plug
and control it from the app, or use the button on the Smart Plug.
You can also use the Smart Plug to set a schedule for your device.
FEATURES
• Press once to turn the plug on or off
• Lights up when the Smart Plug is on and
electricity is flowing through it
• Flashing green: searching for/disconnected
from a Wi-Fi network
Power button
• Solid green: connected to a Wi-Fi network
Power and Wi-Fi
and plug is on
status indicators
• No LED: outlet is off or LED has been
disabled in the app
SAFETY INFORMATION
• Plug directly into an electric outlet (not into an extension cord)
• For indoor use only
• Remove the Smart Plug from the outlet before cleaning
• Keep children away from the Smart Plug and the outlet
• Test the device locally for safe operation before attempting to
control it remotely
• DO NOT use with medical or life support equipment.
• DO NOT clean with liquid
• DO NOT remove the ground pin (middle pin)
• DO NOT use in wet or damp areas
• DO NOT exceed the recommended electrical ratings
• DO NOT use in precision timing applications where inaccurate
timing could be dangerous, such as sunlamps or saunas.
• DO NOT use with devices that should not be operated unattended
• DO NOT use with an outlet controlled by a wall switch as the switch
may be turned off
• Operating ambient temperature: 0° to 40°
Advertisement
Related Manuals for Insignia NS-SP1X7
Summary of Contents for Insignia NS-SP1X7
- Page 1 • Android: Tap Set up new device and follow the on-screen instructions. • Remove the Smart Plug from the outlet before cleaning The Connect app tracks status information for all your Insignia smart home • iOS: Tap Setup new device, then press your device's home button and devices in one place.
- Page 2 - Increase the separation between the equipment and receiver. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled INSIGNIA is a trademark of Best Buy and its affiliated companies with the app. • Make sure your mobile device and the Smart Plug are connected to - Connect the equipment into an outlet on a circuit different from that to which the receiver is environment.
Need help?
Do you have a question about the NS-SP1X7 and is the answer not in the manual?
Questions and answers