Wi-Fi Socket Setup Instructions; Wireless Setup; Qr Code Setup; Web Browser Setup - Bg Wi-Fi Socket Quick Installation Manual

Wi-Fi socket setup instructions:

Ensure that your Wi-Fi socket is connected to the power supply as per 'Wiring instructions' (see reverse).
After the initial power up the LED indicator will illuminate with a solid blue light. After a short period of time the indicator will then start to blink and the product will then be ready for set-up
Proceed with your preferred method of connection:

Wireless setup

There are three installation methods to connect to the Wi-Fi socket;
• Web browser – Using your computer, smart phone or tablet's internet browser (Safari, Chrome, Firefox, Edge, Internet Explorer).
• QR code – Scan the QR code to take you directly to the setup page.
• WPS (Wi-Fi Protected Setup) – One touch setup, no configuration needed.

QR code setup

• On your smartphone or tablet, connect to a new Wi-Fi network called "BG" (no password
is required).
*Note: if the BG network is not showing, please reset the Wi-Fi socket.
• Scan the QR code.
• Select the Wi-Fi network to be extended.
• Enter your Wi-Fi router password.
• Ensure the tick-box "Set Local & Internet SSID as the same" is ticked.
• This will change the BG network name to match your current router network name.
• Click 'Next'.
*Note: Should you need to change the network encryption mode, choose from
the drop-down menu. Default is WPA2-PSK. Refer to your router handbook for
further details.
• Click 'Apply'.
• The Wi-Fi socket should show a solid blue LED, and is now ready to use.
• Your devices will connect using your existing Wi-Fi network name.
Resetting your Wi-Fi socket:
• Press and hold the WPS/RST button on the front of the Wi-Fi socket for 5 seconds
• The LED will blink amber/blue and then extinguish.
• Wait for a blue blinking LED to return
• Your Wi-Fi socket is now ready to setup
Turning off the Wi-Fi function
(holiday mode)
• Press the WPS/RST button 3 times to turn off the RF (Wi-Fi) signal.
The LED will extinguish.
• To turn the functionality back on, press the WPS/RST button 3 times.
The LED will show solid blue and Wi-Fi connectivity will be restored.
*Note: The 13A socket outlets work independently and are unaffected by
holiday mode.
FAQ's
The "BG" network is not showing in my list of networks?
A: Please reset your Wi-Fi socket (Refer to the 'Resetting your Wi-Fi socket' section)
then try again.
I can't see the login page after typing http://bg.repeater.net in the browser, or by
scanning the QR code?
A1: Make sure your computer/phone/tablet is connected to the "BG" Wi-Fi network.
A2: Ensure your Wi-Fi socket is connected to the power and the blue LED indicator is lit.
Once connected, reset the socket.
If you need further assistance you can get in touch with our Technical Helpline on:
BG
My Network
+44 (0)3300 249 279 | technical.support@bgelectrical.co.uk

Web browser setup

• Connect to a new Wi-Fi network called "BG".
(no password is required)
*Note: if the BG network is not showing, please reset the Wi-Fi socket.
• Enter http://bg.repeater.net into your browser search bar.
• Select the Wi-Fi network to be extended.
• Enter your Wi-Fi router password.
• Ensure the tick-box "Set Local & Internet SSID as the same" is ticked. This will change
the BG network name to match your current router network name.
• Click 'Next'.
*Note: Should you need to change the network encryption mode, choose from
the drop-down menu. Default is WPA2-PSK. Refer to your router handbook for
further details.
• Click 'Apply'.
• The Wi-Fi socket will show a solid blue LED, and is now ready to use.
• Your devices will connect using your existing Wi-Fi network name.
OR
WPS (Wi-Fi protected) setup
• Press and hold the WPS button on your
router for 5 seconds.
*Note: WPS connection may differ for
each manufacturer, please refer to your
router handbook for your specific WPS
connection method.
• Press the WPS/RST button once on the
Wi-Fi socket.
• The LED will blink orange whilst connecting to your router.
• Once connected, the LED will light solid blue.
• Your devices will connect using your existing Wi-Fi network name.
Setup advice & how-to guides
Visit www.bgelectrical.uk/wifi for additional support.
How do I reset the Wi-Fi socket?
A: Refer to the 'Resetting your Wi-Fi socket' section.
My router doesn't have a WPS button, what do I do?
A: Please use the 'Web browser' method to setup your Wi-Fi socket.
BG
My Network
LED WI-FI INDICATOR
WPS/RST BUTTON
Luceco plc
Luceco Distribution Centre
Stafford Park 1, Telford
Shropshire, England, TF3 3BD