CB2 Go Cart Manual

go cart
Thank you for purchasing the Go Cart Desk. This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
components
1 - front 1 - front
left right
support support
Made in Taiwan - r06
DESK
1 - desktop
2 - short
crossbars
1 - long
crossbar
2 - back
supports
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
hardware
14 - bolts 4 - spring
washers
2 - locking
wheels
Missing hardware?
Please call 800.606.6387 for replacements.
tool required
wheel hex wrench (included)
hex wrench (included)
allen wrench (included)
nut
shelf
bolt
support
front right
support
Attach desktop to front left/right supports and
back supports as shown with 8 bolts and 8 hex
nuts. While holding each hex nut stationary with
the hex wrench, tighten each bolt using the allen
1
wrench.
14 - hex
nuts
2 - wheels
front left
support
desktop
back
support
Page 1 of 2