NOTICE:
The default ARS mode can be changed by a
qualified radio technician using the radio's
programming software.
Selecting or Changing the ARS Mode
The following method allows you to select or change the
ARS Mode
•
Selecting or Changing the ARS mode using the
MFK:
a. Once the zone you want is displayed, turn the
preprogrammed MFK to the desired mode.
Secure Operations
Secure radio operation provides the highest commercially
available level of voice security on both trunked and
conventional channels.
Unlike other forms of security, Motorola Solutions digital
encryption provides signaling that makes it virtually
impossible for others to decode any part of an encrypted
message.
Send Feedback
Selecting Secure Transmissions
Turn the preprogrammed Secure/Clear switch to the
secure position.
•
If the selected channel is preprogrammed for
clear-only operation, when you press the PTT
button, you hear an invalid mode tone and the
display shows Clear TX only.
•
The radio does not transmit until you set the
Secure/Clear switch to the clear position.
•
If the "Ignore Secure/Clear Switch when
Strapped" programming option is enabled, the
radio transmits without displaying any messages
in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must
be preprogrammed by a qualified radio
technician.
•
The Secure/Clear switch only applies when the
radio is transmitting.
English
67