Advertisement
Quick Links
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or
workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in
material or workmanship. All SSV Works Speakers are covered by a limited 1 year warranty against
defects in material or workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- Wire Crimpers
- Wire Strippers
- T-30 Torx Wrench
- 5/32" Allen Wrench
- 7/16" Socket or Wrench
PARTS LIST IMAGES
1. RZ3-BSSB10 Enclosure x 1
5. 1/4" Washers x 4
9. Subwoofer Grill x 1
- Panel Removal Tool
- Drill with 1/8" and ¼" Drill bit
- Wrench for Battery Terminal
- #3 Phillips Screwdriver
2. M6 x 1.0 Screws x 10
6. 7/16" Nuts x 4
Behind Seat 10" Subwoofer Enclosure
!
PARTS LIST
1. RZ3-BSSB10 Enclosure x 1
2. M6 x 1.0 Screws x 10
3. M6 Washers x 10
4. 1/4"x 20 Screws x 4
5. 1/4" Washers x 4
3. M6 Washers x 10
7. Top Mounting Bracket x 1
RZ3-BSSB10
RZR XP1000
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
6. 7/16" Nuts x 4
7. Top Mounting Bracket x 1
8. Bottom Mounting Bracket x 1
9. Subwoofer Grill x 1
4. 1/4 x 20 Screws x 4
8. Bottom Mounting
Bracket x 1
Advertisement
Related Manuals for SSV Works RZR XP1000
Summary of Contents for SSV Works RZR XP1000
- Page 1 WARRANTY INFORMATION: Please read and understand these All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or instructions completely before workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in installation to avoid possible injury, or material or workmanship.
- Page 2 INSTALLATION NOTES The use of a thread locker is recommended on all screws to prevent loosening due to vibration. This enclosure will not work with some aftermarket headers, confirm fit before beginning installation. Begin by unlatching the seats from the vehicle; remove the center hump using the panel removal tool on the 5 plastic panel clips and the T-30 Torx for the top 2 bolts.
- Page 3 For proper sound, ensure the speaker polarity is correct connect the “+” to the “+” and the “-“to the “-“from the speaker wire to the amplifier. If using with an SSV Works complete system refer to the amplifier wiring instructions for more detailed wiring information.
Need help?
Do you have a question about the RZR XP1000 and is the answer not in the manual?
Questions and answers