Related Manuals for Sheffield PL769
Summary of Contents for Sheffield PL769
-
Page 1: Instruction Manual
DUAL CYCLONE BAGLESS VACUUM MODEL: PL769 Instruction Manual Due to ongoing product improvements, specifications and accessories may change without notice. Actual product may differ slightly to that depicted. -
Page 3: Table Of Contents
CONTENTS 02 Welcome 03 Package Contents 03 Technical Specification 04 Important Safety instructions 06 Important Safeguards 07 Parts 08 Assembly 09 Operation 10 Cleaning and Maintenance AFTER SALES SUPPORT PROLINK ASIA LTD Phone: 0508 776 546 - Mon-Fri 8:30am 4.30pm... -
Page 4: Welcome
WELCOME Congratulations on choosing to buy a Sheffield product. All products brought to you by Sheffield are manufactured to the highest standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 12 Month warranty. -
Page 5: Package Contents
1 x Warranty Card Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other packaging components. They may be potentially dangerous to children. TECHNICAL SPECIFICATION Model: PL769 Rated voltage: 220-240V~50-60Hz Power consumption: 2200W Protection class: Max Air flow: 1.71m3 /min... -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Carefully read this manual before using this appliance. Ensure that you know how the appliance functions and how to operate it. Maintain the appliance in accordance with the instructions to ensure that it functions properly. - Page 7 Use and Environment Do not leave unattended while in use. Do not use outdoors. Do not put any object into openings. Do not use with any opening or outlet blocked. Keep free of dust, lint, hair and anything that may reduce airflow. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
-
Page 8: Important Safeguards
IMPORTANT SAFEGUARDS Always empty the dust bin after vacuuming carpets, fresheners, powders and fine dust. These products clog the filters, reduce airflow and can cause damage to the vacuum cleaner. Failure to do so could cause permanent damage to the Vacuum cleaner. -
Page 9: Parts
PARTS Dust Can Dust Can Release Power ON/OFF Cord Rewind Button Park Assist Speed Control Exhaust Filter Cord Handle Flexible Hose Stainless Tubes Floor Brush Crevice Tool Furniture Brush AFTER SALES SUPPORT PROLINK ASIA LTD Phone: 0508 776 546 - Mon-Fri 8:30am 4.30pm... -
Page 10: Assembly
ASSEMBLY Always remove the plug from the power socket before fitting or removing accessories! Hose Assembly/Disassembly Insert the flexible hose into the suction inlet at the front of the appliance. Press until it clicks into position. To release the flexible hose, firmly squeeze the release buttons on both sides and pull out from the suction inlet. -
Page 11: Operation
OPERATION Before you start the appliance, make sure that all filters are installed. Attach all required accessories onto the vacuum Fully unwind the power cord. A yellow mark on the power cable shows the ideal cable length. Do not extend the cable beyond the red mark! Plug the power cord into a suitable 220-240~50-60Hz outlet. -
Page 12: Cleaning And Maintenance
CLEANING and MAINTENANCE EMPTYING THE VACUUM CLEANER The dust container should be emptied after each use or when there is a noticeable loss of suction Always unplug the unit from electrical outlet before removing the dust collection system. Disconnect the flexible suction hose. Press the dust container release button (1) Lift out the dust container from the Vacuum Cleaner. - Page 13 CLEANING THE FILTERS WARNING! The plug must be removed from the power socket before any maintenance or filter replacement. IMPORTANT The filters must be cleaned regularly for best suction performance and to prevent overheating leading to damage to your vacuum cleaner. Cleaning is best done at the same time as emptying the dust canister after you have finished vacuuming for the day.
- Page 14 CLEANING THE EXHAUST FILTER The exhaust air filter cleans the air a final time before it leaves the vacuum cleaner. You can clean the exhaust air filter as follows: Switch off the vacuum cleaner and disconnect the plug from the mains. To do this, always pull on the plug and not on the cable.
- Page 15 CLEANING THE VACUUM CLEANER When not in use or before cleaning, always disconnect the appliance from the mains supply. Never immerse the motor unit or cord in water or any other fluid, not rinse it under the tap. Use only a moist cloth to clean the motor unit. To clean the exterior, or to reduce static electricity and dust build-up, wipe the outer surface of the Vacuum cleaner and attachments.
Need help?
Do you have a question about the PL769 and is the answer not in the manual?
Questions and answers