Steplfo - Tone2 Icarus Manual

In non-BPM Mode
◦
to 440.1 Hz
Mono button – Switches the LFO into Mono Mode.
•
ENV button – Switches the LFO OneShot Envelope Mode on/off.
•
Shape – Adjusts the current LFO shape.
•
Key – Sets the amount of key follow to use for this LFO.
•
Phase – This will adjust the starting position of the LFO's waveform.
•
Fade in – This control adds a fade-in to the LFO.
•
The Step LFO
The Step LFO uses a Multi-Stage Envelope in which you can set up your own shape by
dragging envelope points. Simply left-click on one of its points and drag it to the desired
location.
Like LFOs, a step LFO doesn't produce any sound in itself, a step LFO is used to modulate
another sound parameter to achieve cyclic modulations (changes) of this parameter over
time, according to the Speed knob settings.
Please note that the step LFO is always synced to your host's tempo.
Available controls are:
SPEED – This knob controls the speed of the step LFO. The range depends on the
•
LFO Mode:
In BPM Mode
◦
BPM is half of your host's tempo, 4 BPM is four times your host's tempo.
– The range will be shown in Hertz (Hz). The range is 0.02 Hz
– The range will be shown as a multiple of the host's tempo. e.g. 1/2
63