Remington HC5015 Use And Styling Manual

IMPORTANT SAFETY
Models HC5010, HC5015, HC5020, HC5030
When using an electrical appliance,
basic precautions should always be
Use and
observed, including the following.
Read all instructions before using
this appliance.
Styling Guide
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
■ Do not use while bathing or in
the shower.
■ Do not place or drop into water
or other liquid.
■ Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
■ Always unplug this appliance from
the electrical outlet immediately
after using.
■ Unplug this appliance before
cleaning it.
Register Your New Product Today!
By registering your new Remington ® product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
■ Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
INSTRUCTIONS
being administered.
■ Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
WARNING
exceeding 140°F (60°C).
■ Do not plug or unplug this
To reduce the risk of burns, fire, appliance when your hands are
electric shock or injury to persons: wet.
■ This appliance is for household
■ Do not use an extension cord
use only. or a voltage converter with this
appliance.
■ An appliance should never be left
unattended when it's plugged in.
■ Always attach the plug to the
appliance, then to the outlet. To
■ Close supervision is necessary
disconnect, turn all controls to
when this appliance is used by,
OFF, then remove plug from outlet.
on, or near children or persons
Detach removable power cords
with special needs.
from appliances for storage.
■ Use this appliance only for its
■ Do not place this appliance on any
intended use as described in this
surface while operating.
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
■ Keep the cord away from heated
surfaces.
■ Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
SAvE ThESE INSTRUCTIONS
dropped or damaged, or if it has
been dropped into water. If any
of these things happen, return
the appliance to a Remington
authorized service center for
examination and repair.
■ Never drop or insert any object into
any of the appliance's openings.
■ This appliance has a polarized plug
Product Features
(one blade is wider than the other).
As a safety feature, this plug will
fit in a polarized outlet only one
way. If the plug does not fit fully
Thank you for choosing Remington. Your clipper is designed to perform dependably
in the outlet, reverse the plug. If it
and efficiently for years helping you to maintain a range of hair styles.
still does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
■ Do not use this appliance with a
Part HC5010 HC5015
damaged or broken cutting unit,
1. Clipper Unit x x
as injury may occur. Always make
2. Style Guide x x
certain blades are aligned properly.
3. Blade Guard x x
■ This clipper is designed for use
4. Light Texture Comb
with 120 Volts AC, 60 HZ electrical
outlets. Do not connect the clipper 5. Heavy Texture Comb
to a higher voltage than indicated,
6. # 0 (1.5 mm) Guide Comb x
as it may result in personal injury
7. # 1 (3 mm) Guide Comb x x
and/or damage to the clipper.
8. # 2 (6 mm) Guide Comb x x
9. 3 (9 mm) Guide Comb x x
#
10. 4 (12 mm) Guide Comb x x
#
11. 5 (16 mm) Guide Comb x
#
12. 6 (18 mm) Guide Comb x
#
13. 7 (22 mm) Guide Comb x
#
14. 8 (25 mm) Guide Comb
#
15. 9 (30 mm) Guide Comb
#
16. Left Ear Taper x x
17. Right Ear Taper x x
18. Thin Hair Lifter x
19. T-Brush x x
20. Neck Brush x
21. Nylon Cape x
22. Standard Storage Case x
23. Deluxe Storage Case
24. Oil Bottle x
25. Scissors x x
26. Barber Comb (7") x
27. Sectioning Clips 2x
1
HC5020 HC5030
x x
x x
x x
x
HC5010 HC5015 HC5020,
HC5030
x
x x
x x
x x
x x
x x
14
2
x x 5
x x 13 24
4 15
x x
x x
12
9
x
x x
11
8
x x
3
17
x x
10
7
x x
x x
16
18
6
x x
x x
19
x
x x
x x
20
4x 4x
21 22
How to Use
Line Cord Safety Tips
10-15 seconds to remove excess hair
NOTE: This appliance has a polarized and debris. To reattach blade, align
plug (one blade is wider than the notch on blade assembly with receiver
other). As a safety feature, this plug on clipper body and simply snap back
will fit in a polarized outlet only one into place. DO NOT RINSE CLIPPER
way. If the plug does not fit fully in BODY IN WATER.
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1. To insert plug, grasp it firmly and
guide it into outlet.
2. To disconnect the appliance, grasp Taper Lever
the plug and remove it from outlet.
The HC5020 and HC5030 include a
Do not pull or yank on the cord or
Taper Lever. Use the Taper Lever to
appliance. Do not wrap the cord
add versatility to your hair cuts by
around the appliance. changing the closeness of the blades
gradually. The Taper Lever has 6
Thin Hair Lifter length options with the fully forward
position providing the closest cut.
The Thin Hair Lifter (item 18), is perfect
Moving the lever gradually backward
for use on thin or curly hair. Additional
25
increases the length.
teeth help to pickup hairs that may lie
flat, making them difficult to cut. To
use, snap Thin Hair Lifter onto desired
Blade Care
guide comb then use guide comb as
The life of your clippers will depend
normal.
on frequency of use, care, hair type,
26
and condition. The HC5015 and
Removable Blade Assembly
HC5020 have blades that do not
27 The HC5030 has a removable blade
require additional oiling. To maintain
assembly that allows you to brush out
the HC5010 blades in peak condi-
and rinse the blades under water for
tion, apply oil after every three to
easy cleaning. DO NOT rinse clipper
four haircuts. The HC5030 has a
body in water. Blades can only be
removable blade assembly that can
rinsed when they are detached from
be rinsed under water. It is recom-
clipper body. To remove, grasp blade
mended to oil the blades after each
assembly firmly in one hand and clip-
time it is rinsed.
per in the other hand, then pull apart.
Rinse blades under running water for
23