Denso BHT-1400QWB-CE Software User Manual page 159

Value List
Parameter
Common
Pwd
Taskbar
TenKey
TenKeyInterval
MenuFontName
MenuFontSizeQvga
MenuFontSizeHvga
MenuFontSizeVga
MenuFontSizeWqvga
MenuFontSizeWvga
Applications
Path | Name | Font
Path
Name
Font
AdminApplications
Parameters are the same as "Applications" in the user mode.
*The apostrophe ("") is used for applications that are not necessary to display (not run manually) or not allowed
to display, such as an ActiveSync/WMDC auto-execute application or CAB install application.
Example:
\windows\rnaapp.exe
\windows\wceload.exe
GUI screen
Application Launcher function settings
Password
Taskbar
Enable 10-key
Keystroke
interval
Menu Font
QVGA
HVGA
VGA
WQVGA
WVGA
Application information allowed in the user mode.
'|': Separation character.
Enter "|" after each application path as a separation.
Name and font can be omitted.
Path
Name
Font
Application information allowed in the admin mode.
' ActiveSync/WMDC autoconnect
' Install CAB files
Value
Enter the administrator password
Maximum 255 characters.
Default: ""(blank), No password
Use this parameter to show or hide the taskbar.
0: Hide, 1: Show (Default)
0: Disabled (Default), 1: enabled
time 1 to 5 seconds, Default: 2 seconds
BHT font
Default:""(blank), Tahoma
1 to 72pt.
A value exceeding maximum size is set to 72pt.
Maximum 255 characters.
Enter full path of an application.
(ex.) "\path\app.exe"
Maximum 255 characters.
An application name entered can be selected from
the application list.
When the apostrophe ("") is entered, an application
will not be displayed in the application list and cannot
be selected from the list.*
BHT font
When the check box is checked, an application name
is displayed in a selected font.
When unchecked, the font set in the "Settings" menu
is used to display an application name.
- 151 -